Abstract:Unraveling the microstructural heterogeneity is an important issue to understand the physical and mechanical properties of metallic glasses. Structural relaxation below the glass transition temperature Tg and cold rolling at ambient temperature are effective ways to tune the state within the potential energy landscape of metallic glasses, modifying the microstructural heterogeneity. With the help of nanoindentation technique, by scrutinizing the local reduced modulus and hardness of a typical Zr50Cu40Al10 metallic glasses in different energy states (from structural relaxed state to rejuvenated state), we demonstrate that the enhancement of microstructural heterogeneity plays an important role in tailoring the mechanical behavior. The internal friction coefficient is obtained by fitting the experimental load-displacement curves with finite element simulation. It is found that internal friction coefficient decreases with the increase of concentration of flow defects. The stress exponent obtained from the creep stage shows a strong dependence on the structural state of metallic glasses. Effects of structural relaxation and rejuvenation on the structural state are rationalized in terms of the relative flow defects concentration. Finally, the statistics of discrete displacement bursts during the deformation process were probed. We find that the displacement bursts behavior is sensitive to the structural energy state (microstructural heterogeneity). The displacement bursts phenomenon changes from obvious (relaxed state) to unapparent behaviors (rejuvenated state). By given a physical schematic, the correlation between the displacement bursts size and the shear band size in the local plastic zones is well established, which will lead to a deeper understanding of the rejuvenation-induced plasticity of metallic glasses.

Real Time Synchrotron Radiation Studies on Metallic Glass (zr0.55al0.1ni0.05cu0.3)99y1 after Cold Rolling

Effects of Room-Temperature Rolling on Microstructure and Crystallization Behavior of Zr55Cu40Al5 Metallic Glass

Crystallization Behavior of Zr55Al10Cu30Ni5 Bulk Metallic Glass Rolled at Room Temperature

Effect of Rolling Deformation on the Microstructure of Bulk Cu60Zr20Ti20 Metallic Glass and Its Crystallization

Microstructural evolution during annealing and rolling Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass

Phase Transition in the Zr60Al15Ni25 Bulk Metallic Glass Subjected to Rolling at Room Temperature

Microstructure and mechanical property of Zr 65 Al 7.5 Ni 10 Cu 12.5 Ag 5 bulk metallic glass subjected to rolling

Influence of Thermal Treatments and Plastic Deformation on the Atomic Mobility in Zr50.7Cu28Ni9Al12.3 Bulk Metallic Glass

Effect of Rolling on the Microstructure and Mechanical Property of Zr52.5Cu17.9Ni14.6Al10Ti5 Bulk Metallic Glass

Influence of cold-rolling on the hardness of Zr65Al7.5Ni10Cu17.5 bulk metallic glass

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

Effect of Cold Rolling on Glass Transition of Zr55Al10Ni5Cu30 Bulk Metallic Glass

Isochronal and isothermal crystallization in Zr55Cu30Ni5 Al10 bulk metallic glass

Rolling-Induced Microstructure Change in Zr65al7.5ni10cu12.5ag5 Bulk Metallic Glass

Microstructure of Cu 60 Zr 20 Ti 20 Bulk Metallic Glass Rolled at Different Strain Rates

Impact of the Structural State on the Mechanical Properties in a Zr–Co–Al Bulk Metallic Glass

Microstructure and Microhardness Evolutions of Cu47.5zr47.5al5 Bulk Metallic Glass Processed by Rolling

Effect of Thermo-Mechanical Histories on the Microstructure and Properties of Zr65Al10Ni10Cu15 Metallic Glassy Plates

Investigation of Viscosity and Crystallization in Supercooled-Liquid Region of Zr-Based Glassy Alloys

Tensile Deformation Behaviour of Zr-based Glassy Alloys

Free Volume Evolution of Pre-Annealed Zr55al10ni5cu30 Bulk Metallic Glass During Rolling