Abstract:The effects of thermal treatments on metallic glass nanolaminates (NLs), with a composition of Zr$_{24}$Cu$_{76}$ and Zr$_{61}$Cu$_{39}$ and a bilayer period of 50 nm, were explored to control their mechanical properties through annealing-induced atomic structure modifications, structural relaxation, and partial crystallisation. Annealing treatments up to 330 °C ($T$ < $T_g$, the glass transition temperature) maintain the amorphous structure of the NLs, while inducing atomic structural relaxation, densification, and free volume annihilation, reducing the formation of corrugations on fracture surfaces. Atom probe tomography measurements reveal that annealing at 330 °C for 60 mins also causes intermixing between layers, altering their compositions to Zr$_{44}$Cu$_{56}$ and Zr$_{55}$Cu$_{45}$ with increased mixing enthalpy. Moreover, the NLs exhibit superior thermal stability against crystallisation compared to their monolithic counterparts, remaining amorphous up to 420 °C, while the monolithic Zr$_{24}$Cu$_{76}$ and Zr$_{61}$Cu$_{39}$ films are crystalline at 390 °C, as a result of chemical interdiffusion and the heterogeneous NL structure of delaying the onset of crystallisation. Annealing treatments $T$ > $T_g$ ($\sim$420 °C) induce partial crystallisation, forming Cu-Zr-based intermetallic and Zr-oxide phases, whereas annealing $T$ < $T_g$ (330 °C) retains a visible layer structure. Nanoindentation analyses show a progressive increase in elastic modulus and hardness for higher annealing temperatures as a result of structural relaxation and likely nanocrystal formation, with a maximum hardness equal to 7.6 $\pm$ 0.2 GPa obtained after heat treatment at 420 °C for 60 mins and exceeding the rule-of-mixtures. These results highlight the potential of thermal treatments to tailor the structural, mechanical and thermal properties of metallic glass NLs.

Effects of Room-Temperature Rolling on Microstructure and Crystallization Behavior of Zr55Cu40Al5 Metallic Glass

Effect of Rolling Deformation on the Microstructure of Bulk Cu60Zr20Ti20 Metallic Glass and Its Crystallization

Effects of cold rolling on the tensile response of glassy polymers: Experiments and modeling

Microstructure and Microhardness Evolutions of Cu47.5zr47.5al5 Bulk Metallic Glass Processed by Rolling

Evolution of Shear Bands in the Structure of a Zirconium-Based Amorphous Alloy during Rolling at Different Temperatures

Microstructure and Stored Energy Evolutions During Rolling of Cu60Zr20Ti20 Bulk Metallic Glass

Effect of Pre-Existing Shear Bands on the Tensile Mechanical Properties of A Bulk Metallic Glass

Characterization of Plastic Deformation in CuZr Metallic Glasses Subjected to the Rolling Process

Shear Band Evolution and Hardness Change in Cold-Rolled Bulk Metallic Glasses

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Effect of cold rolling on microstructure and mechanical properties of pure Zr

Recrystallization Behavior and Mechanical Properties of Az31b Alloy During the Hot-Rolling Process

Deformation-strengthening During Rolling Cu60Zr20Ti20 Bulk Metallic Glass

Free-Volume Evolution and Its Temperature Dependence During Rolling of Cu60zr20ti20 Bulk Metallic Glass

Mechanically Driven Phase Separation and Corresponding Microhardness Change in Cu60Zr20Ti20 Bulk Metallic Glass

Effect of cryogenic rolling on the microstructure and texture of CuCrZr alloy

Recreating the shear band evolution in nanoscale metallic glass by mimicking the atomistic rolling deformation: a molecular dynamics study

Microstructure and crystallization in Cu50Zr45Al5 metallic glass

The Pitting Corrosion Behavior of Shear Bands in A Zr-Based Bulk Metallic Glass

Thermal modification of ZrCu metallic glass nanolaminates: Structure and mechanical properties

Effect of cold rolling on the serrated flow behavior of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass during nanoindentation