Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. In order to study the influence of friction coefficient on the stiffness of disc spring, A series of disc springs (D = 71 mm) were selected in this paper. The tension and compression experiments of disc spring components were carried out by universal testing machine. The load-displacement characteristic curves of disc springs with different friction surfaces were obtained. The results show that in the loading process, the friction effect hinders the increase of the deformation of the disc spring, so that the actual stiffness of the disc spring is improved and the actual compensation amount is reduced, so this result is worthy of attention. In order to further study the influence of friction coefficient on the loading process of disc spring, according to the load-deformation formula of disc spring in A-L method, the tangential stress caused by friction is added, and the stiffness calculation model of corresponding disc spring is established by Workbench finite element software. The coefficients of different friction surfaces are used as variables for numerical calculation. The results show that the theoretical calculation, numerical calculation and experimental results of stiffness increase with the increase of friction coefficient under 0.55h (the compensation displacement of A71 disc spring under the working displacement of corrugated tube ±10 mm). Among them, the numerical calculation results are close to the experimental results, and the error value is less than 1%. The numerical calculation results are corrected by using the experimental data, and the corrected model calculation results are in good agreement with the measured results.

Performance analysis of spiral flexure bearing

Finite element analysis and experimental study of spiral flexure spring

Influence of geometry parameters on the performance of flexure bearing

Optimum design of spiral flexure spring for high-frequency pulse tube cryocooler

The Mechanical Behavior of the Double Piece of Tape Spring

Performance Analysis of Three Type Flexure Bearings for Linear Compressors

The performance comparison of Oxford and triangle flexure bearings

Statics Modeling and Analyzing of Three-Degree-of-Freedom Spherical Ultrasonic Motors with the Spiral Spring

Modeling and dynamics analysis of helical spring under compression using a curved beam element with consideration on contact between its coils

Study on the Static Properties of Spiral Springs under Static Loading

Optimization design of elastic bearing mechanism with cross leaf spring

Enhanced compression performance of an improved rectangular helical spring incorporated support feature

Finite Element Analysis of a Flexible Ferris Wheel

THE MECHANICAL PERFORMANCE OF SINGLE DIAGONAL LACING DOUBLE-WEB STAY MEMBERS OF OPEN CONCRETE FILLED STEEL TUBES WITH FOUR MAIN ELEMENTS

Stiffness and Strength Analysis of Composite Cylindrical Helical Springs

Analysis of Bearing Characteristics of Wave Spring Used in Mechanical Seal

Influence of fractal-based contact friction coefficient on the stiffness of disc springs: Experimental and numerical studies

Finite Element Analysis on the Stiffness of Leaf Springs

Analysis of the Mechanical Properties and Study of Influential Factors of Different Materials in Tape Spring

Research on torsional stiffness of flexspline-flexible bearing contact pair in harmonic drive based on macro-micro scale modeling

Analysis Method for Elastic Characteristics of Arc Spring