Microstructures and Phase Transformations of Ti-30zr-Xnb (X=5, 7, 9, 13 At.%) Shape Memory Alloys
Wentao Qu,Xuguang Sun,Bifei Yuan,Chengyang Xiong,Fei Zhang,Yan Li,Baohui Sun
DOI: https://doi.org/10.1016/j.matchar.2016.10.019
IF: 4.537
2016-01-01
Materials Characterization
Abstract:The microstructures, phase transformations and shape memory properties of Ti-30Zr-xNb (x=5, 7, 9, 13at.%) alloys were investigated. The X-ray diffraction and transmission electron microscopy observations showed that the Ti-30Zr-5Nb, Ti-30Zr-7/9Nb and Ti-30Zr-13Nb alloys were composed of the hcp α′-martensite, orthorhombic α″-martensite and β phases, respectively. The results indicated the enhanced β-stabilizing effect of Nb in Ti-30Zr-xNb alloys than that in Ti-Nb alloys due to the high content of Zr. The differential scanning calorimetry test indicated that the Ti-30Zr-5Nb alloy displayed a reversible transformation with a high martensitic transformation start temperature of 776K and a reverse martensitic transformation start temperature (As) of 790K. For the Ti-30Zr-7Nb and Ti-30Zr-9Nb alloys, the martensitic transformation temperatures decreased with the increasing Nb content. Moreover, an ω phase transformation occurred in the both alloys upon heating at a temperature lower than the corresponding As, which is prompted by more addition of Nb. Although the critical stress in tension of the three martensitic alloys decreased with increasing Nb content, the Ti-30Zr-9Nb alloy showed a critical stress of as high as 300MPa. Among all the alloys, the Ti-30Zr-9Nb alloy exhibited the maximum shape memory effect of 1.61%, due to the lowest critical stress for the martensite reorientation.