Abstract:This paper investigates the air flow induced by a rigid circular disk or piston vibrating harmonically along its axis of symmetry in the immediate vicinity of a parallel surface. Previous attempts to characterize these so-called ‘squeeze-film’ systems largely relied on simplifications afforded by neglecting either fluid acceleration or viscous forces inside the thin enclosed gas layer. The present viscoacoustic analysis employs the asymptotic limit of small vibration amplitudes to investigate the flow by systematic reduction of the Navier–Stokes equations in two distinct flow regions, namely, the inner gaseous film where streamlines are nearly parallel to the confining walls and the near-edge region of non-slender flow that features gas exchange with the surrounding stagnant atmosphere. The flow in the gaseous film depends on the relevant Stokes number, defined as the ratio of the characteristic viscous time across the film to the characteristic oscillation time, and on a compressibility parameter, defined as the square of the ratio of the acoustic time for radial pressure equilibration to the oscillation time. A Strouhal number based on the local residence time emerges as an additional governing parameter for the near-edge region, which is incompressible at leading order. The method of matched asymptotic expansions is used to describe the solution in both regions, across which the time-averaged pressure exhibits comparable variations that give opposing contributions to the resulting time-averaged force experienced by the disk or piston. A diagram structured with the Stokes number and compressibility parameter as coordinates reveals that this steady squeeze-film force, typically repulsive for small values of the Stokes number, alternates to attraction across a critical separation contour in the parametric domain that exists for all Strouhal numbers. This analysis provides, for the first time, a unifying viscoacoustic theory of axisymmetric squeeze films, which yields a reduced parametric description for the time-averaged repulsion/attraction force that is potentially useful in applications including non-contact fluid bearings and robot locomotion.

Pure Squeeze Action in an Isothermal Elastohydrodynamically Lubricated Spherical Conjunction Part 2. Constant Speed and Constant Load Results

Pure Squeeze Action in an Isothermal Elastohydrodynamically Lubricated Spherical Conjunction Part 1. Theory and Dynamic Load Results

Elastic contact mechanics: percolation of the contact area and fluid squeeze-out

Squeeze flow of a Maxwell fluid between a sphere and a plate

Squeeze film characteristics of a rigid lubricated axisymmetric indenter punch onto unbonded and bonded soft elastic layers

Lubrication Of Nonconformal Contacts

Pressure Distribution in a Porous Squeeze Film Bearing Lubricated with a Herschel-Bulkley Fluid

Numerical simulations of lubricated contact - Effects of variation of entraining velocity

A Full Numerical Solution to the Mixed Lubrication in Point Contacts

Fluid squeeze-out between rough surfaces: comparison of theory with experiment

Capillary lubrication of a spherical particle near a fluid interface

An Analysis of Elastohydrodynamic Lubrication with Limiting Shear Stress: Part I—Theory and Solutions

Combined effect of circumferential roughness and squeeze velocity on ferrofluid squeeze film with rotating sphere and rough plate

Effect of Pressure Dependent Viscosity on Couple Stress Squeeze Film Lubrication between Rough Parallel Plates

Squeeze Behavior of Magnetorheological Fluids under Constant Volume and Uniform Magnetic Field

Simulation of Lubricant Rheology in Thin Film Lubrication Part I: Simulation of Poiseuille Flow

Combined effects of piezo – viscous coupled stress lubricant and rotational inertia upon squeeze film performance of rough circular discs

Aspects of modeling and numerical simulation of dry point contacts between viscoelastic solids

Viscoacoustic squeeze-film force on a rigid disk undergoing small axial oscillations

Frictional Behaviour of Engineering Surfaces in Overall Lubrication Regimes of Point Contacts

About the Load-Carrying Capacity of Elastohydrodynamic Lubrication Film