Electrochemical Studies on a Zirconium Hexacyanoferrate Modified Electrode and Utility for the Determination of Rubidium

Shou-Qing Liu,Yun Chen,Hong-Yuan Chen

DOI: https://doi.org/10.1002/1521-4109(200201)14:2<116::AID-ELAN116>3.0.CO;2-Q

IF: 3.077

2002-01-01

Electroanalysis

Abstract:Zirconium hexacyanoferrate (ZrHCF), a new Prussian blue analogue, was immobilized on the surface of a gold electrode by potential scan. The results showed that the peak current is proportional to scan rate up to 200 mVs (1), showing the surface reaction characteristics, accordingly to the theoretical estimation the average coverage of ZrHCF on the gold electrode surface is 1.3 x 10(-8)mol/cm(2). At higher scan rates the peak current becomes proportional to the square root of the scan rate, displaying the mass transfer in the charge balance process. The modified electrode has a good response in a potassium chloride solution, the dependence of potential on the K- concentration from 0.02 M to 2.0 M shows a Nernstian response with a slope of 57 mV per decade. Compared with that in rubidium solution, however, the modified electrode can be strongly inhibited by rubidium in the voltammetric response, therefore, differentiating between potassium ion and rubidium ion. Using the selective inhibition of the low-spin iron by rubidium, the ZrHCF electrode was developed as an electrochemical sensor for the quantification analysis of rubidium by the calculation of the relative response I-p/I-p0 of the currents. The relative response vs. rubidium concentration has two linear segments in the concentration range between 2.5 x 10 (4) M and 1.5 x 10 (2) M. A relative standard deviation at C-Rb. 1.00 x 10(-3) M was 1.21% (n = 5), the detection limit was 5.0 x 10 (5) M. The excess of potassium and sodium did not interfere with the determination for rubidium.