Abstract:Zirconium hexacyanoferrate (ZrHCF), a new Prussian blue analogue, was immobilized on the surface of a gold electrode by potential scan. The results showed that the peak current is proportional to scan rate up to 200 mVs (1), showing the surface reaction characteristics, accordingly to the theoretical estimation the average coverage of ZrHCF on the gold electrode surface is 1.3 x 10(-8)mol/cm(2). At higher scan rates the peak current becomes proportional to the square root of the scan rate, displaying the mass transfer in the charge balance process. The modified electrode has a good response in a potassium chloride solution, the dependence of potential on the K- concentration from 0.02 M to 2.0 M shows a Nernstian response with a slope of 57 mV per decade. Compared with that in rubidium solution, however, the modified electrode can be strongly inhibited by rubidium in the voltammetric response, therefore, differentiating between potassium ion and rubidium ion. Using the selective inhibition of the low-spin iron by rubidium, the ZrHCF electrode was developed as an electrochemical sensor for the quantification analysis of rubidium by the calculation of the relative response I-p/I-p0 of the currents. The relative response vs. rubidium concentration has two linear segments in the concentration range between 2.5 x 10 (4) M and 1.5 x 10 (2) M. A relative standard deviation at C-Rb. 1.00 x 10(-3) M was 1.21% (n = 5), the detection limit was 5.0 x 10 (5) M. The excess of potassium and sodium did not interfere with the determination for rubidium.

Kinetic Determination Of Hexacyanoferrates By Their Inhibition Of An Oscillating Chemical-Reaction

Determination of cesium using nickel hexacyanoferrate by stripping voltammetry

Rapid and selective RRS determination of ferrocyanide with a nanogold surface molecularly imprinted polymethacrylic acid probe

Determination of Kinetic Parameters of 1,1′-Diacylferrocene at a Gold Microdisc Electrode

Determination of Trace Chromium by Square-Wave Adsorptive Cathodic Stripping Voltammetry at an Improved Bismuth Film Electrode

Catalytic effect of copper on the hexacyanoferrate(III)-cyanide redox reaction-II catalytic determination of copper

Electrochemical Studies on a Zirconium Hexacyanoferrate Modified Electrode and Utility for the Determination of Rubidium

Determination of kinetic parameters of 1-acylferrocene at a platinum microelectrode

Understanding the Basics of Electron Transfer and Cyclic Voltammetry of Potassium Ferricyanide - An Outer Sphere Heterogeneous Electrode Reaction

Indirect Spectrophotometric Method Based on a Selective Reaction Between Bicinchoninic Acid and Copper(I) for the Determination of Metal Ions

Analytical application of the reaction system disulphonated hydroquinone-hydrogen peroxide for the kinetic spectrophotometric determination of iron traces in acidic media

Understanding Variations in Ferrate Detection through the ABTS Method in the Presence of Electron-Rich Organic Compounds

Kinetics of Hexavalent Chromium Reduction by Iron Metal

Revisiting the Phenanthroline and Ferrozine Colorimetric Methods for Quantification of Fe(II) in Fenton Reactions

High-performance Liquid Chromatographic Method for the Determination of Ultratrace Amounts of Iron(ii) in Aerosols, Rainwater, and Seawater

Chitosan-adhered graphene/nano iron tetroxide carbon paper electrode for the detection of hexavalent chromium

Colorimetric and visual sensing of ferrous ion by Fenton reaction-stimulated etching of triangular gold nanoplates

Kinetics and Mechanisms of Amorphous FeS2 Induced Cr(VI) Reduction.

Voltammetric Detection of Potassium Ferricyanide Mediated by Multi-walled Carbon Nanotube/Titanium Dioxide Composite Modified Glassy Carbon Electrode

Determination of iron(II) and iron(III) via static quenching of the fluorescence of tryptophan-protected copper nanoclusters

Fluorescent Silver Nanoclusters for Ultrasensitive Determination of Chromium(vi) in Aqueous Solution