Abstract:Introduction. Functionally graded materials are of great use, because heterogeneity of properties enables to control the strength and rigidity of structures. This has caused great interest in the topic in the world scientific literature. The construction of solutions to such problems depends significantly on the type of boundary conditions. In this paper, we consider the equilibrium of a thin-walled circular cylinder whose mechanical properties change along the radius. Homogeneous boundary conditions were set on cylindrical surfaces that had not been considered before, the effect was on the ends. The mathematical formulation of the problem was carried out in the linear theory of elasticity in the framework of axisymmetric deformation. Expressions were constructed for the components of the stress-strain state of the cylinder, in which some coefficients were found from the solution to the resulting system of linear algebraic equations. Materials and Methods. The material of the cylinder was linearly elastic, the elastic modulus of which depended linearly on the radial coordinate. The basic research method was the asymptotic method, in which half the logarithm of the ratio of the outer and inner radii acted as a small parameter. Iterative processes were used to construct the characteristics of the stress-strain state of the cylinder. Results. Homogeneous solutions to the boundary value problem were obtained for a linearly elastic functionally gradient hollow thin-walled cylinder. An analysis of these solutions made it possible to reveal the nature of the stress-strain state in the cylinder wall. For this purpose, an asymptotic analysis of the solutions was carried out, relations for displacements and stresses were obtained. It was determined that those solutions corresponded to the boundary layer, while their first terms determined Saint-Venant edge effect similar to the plate theory. Discussion and Conclusion. The analytical solution to the equilibrium problem of a thin-walled cylinder inhomogeneous in radius constructed by asymptotic expansion can be used for numerical solution to a specific problem. For this, it is required to solve the obtained systems of linear algebraic equations and determine the corresponding coefficients. The resulting asymptotic representations provide analyzing the three-dimensional stress-strain state. The selection of the number of expansion terms makes it possible to calculate displacements and stresses with a given degree of accuracy. This analysis can be useful in assessing the adequacy of applied calculation methods used in engineering practice.

An Analytical Study on the Geometrical Size Effect on Phase Transitions in a Slender Compressible Hyperelastic Cylinder

Unified Plastic Limit Solution for Thick-Walled Cylinder with Size Effect

The Transient Responses of a Special Non-Homogeneous Magneto-Electro-elastic Hollow Cylinder for Axisymmetric Plane Strain Problem

The Transient Responses of Piezoelectric Hollow Cylinders for Axisymmetric Plane Strain Problems

Unified Solution of a Borehole Problem with Size Effect

Transient responses of a special non-homogeneous magneto-electro-elastic hollow cylinder for a fully coupled axisymmetric plane strain problem

TRANSIENT THERMOELASTIC SOLUTION OF A MULTILAYERED ORTHOTROPIC HOLLOW CYLINDER FOR AXISYMMETRIC PROBLEMS

Pitchfork and Octopus Bifurcations in a Hyperelastic Tube Subjected to Compression: Analytical Post-Bifurcation Solutions and Imperfection Sensitivity

Analysis of Stress-Strain State of a Cylinder with Variable Elasticity Moduli Based on Three-Dimensional Equations of Elasticity Theory

Buckling of Thin-Walled Cylinders from Three Dimensional Nonlinear Elasticity

Analysis of Size Effects Based on A Symmetric Lower-Order Gradient Plasticity Model

Analytical solutions of stress distribution within a hollow cylinder under contact interactions

Bifurcation of Pressurized Functionally Graded Elastomeric Hollow Cylinders

Numerical Simulation of the Quasi-Static Axial Compression of the Pseudo-Elastic Phase Transformation Cylindrical Shells

Large deformation and instability of soft hollow cylinder with surface effects

Computational instability analysis of inflated hyperelastic thin shells using subdivision surfaces

A Numerical Study on Bifurcations in Multi-Void Growth in Nonlinear Elasticity

Transient Thermal Stresses in an Orthotropic Hollow Cylinder for Axisymmetric Problems

Asymptotic Behavior of the Solution to the Axisymmetric Dynamical Problem of the Elasticity Theory for the Transversally Isotropic Spherical Layer of Small Thickness

Size effect in transverse mechanical behavior of one-dimensional nanostructures

Buckling And Surface Wrinkling Of An Elastic Graded Cylinder With Elastic Modulus Arbitrarily Varying Along Radial Direction