Study of solid polyurethane electrolytes synthesized from HDI and PEO of different molecular weight
Qian Zhang,Yuhao Wen,Kang Liu,Nailiang Liu,Yaping Du,Chunjie Ma,Liang Zhou,Yongri Liang,Yongcheng Jin
DOI: https://doi.org/10.1016/j.jelechem.2021.115305
IF: 4.598
2021-07-01
Journal of Electroanalytical Chemistry
Abstract:<p>The development of solid polymer electrolyte (SPE) is important for the fabrication of safe and high performance lithium ion battery of the next generation. A series of polyurethanes (PUs) based SPEs synthesized from hexamethylene diisocyanate (HDI) and poly(ethylene glycol)s (PEGs) of varying molecular weight (<em>MW</em>=300∼1500 corresponding to PU03∼PU15) via one-step approach are investigated for the conductivity of lithium ion and other electrochemical properties. These synthetic PUs exhibit semi-crystalline structures when the <em>MW</em> of PEG is higher than 300, and turn into amorphous after the addition of LiClO<sub>4</sub>. The ionic conductivity decreases with the increasing concentration of LiClO<sub>4</sub>. The highest lithium ion conductivity was found to be 3.42×10<sup>-5</sup> S/cm for PU15 with 10 wt% LiClO<sub>4</sub> at 50 °C. However, its lithium ion transference number is low by 0.15. All of the PU-based SPEs containing 10 wt% LiClO<sub>4</sub> are electrochemically stable up to 4.2∼4.5 V versus Li<sup>+</sup>/Li, and show very good cycling stability in charge/discharge experiments. In the assembled battery with LiFePO<sub>4</sub> as the cathode, PU15 displays higher performances than PU03, indicating good correlation to the molecular weight of PEG.</p>
chemistry, analytical,electrochemistry