Abstract:The alkaline zinc electrowinning process can directly recover powdery Zn metal from oxidized zinc ores and industrial wastes. However, the industrial-scale practice shows that the Zn powders produced generally have a broad particle size distribution, and further milling is required prior to applications. In this study, the effects of two kinds of organic additives, polyethylene glycol (PEG) and tween 80, on the particle size refinement of Zn deposits in alkaline electrolytes were investigated for the first time. The results show that both of the additives dramatically reduced the particle size of Zn deposits and increased the weight percentage of undersized product (< 150 mu m) while the current efficiency remained > 98% and the Zn purity was > 99%. From results of scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDS), X-ray diffraction (XRD) analysis, and cyclic voltammetry (CV) experiments, the possible explanation is that the addition of tween 80 and/or PEG increased cathodic overpotential and subsequently increased the Zn nucleation rate and restrained the Zn grain growth. Eventually, an increased amount of Zn deposits with fine 3-D structure were produced, and a higher Zn deposit refinement was achieved. Orthogonal experiments were designed to investigate the co-effects of the additives and the electrolysis parameters: electrolyte temperature, current density, and electrolysis time. The optimum particle size refinement was obtained when 5 mg/L tween 80 and 100 mg/L PEG were added to the alkaline electrolyte, and the electrolysis was conducted for 10 min at 0. with a current density of 800 A/m(2); 99.82 wt.% of < 150 mu m particles and 52.94 wt.% of < 45 mu m particles were observed.

Effects of EDTA and Arginine on Zinc Electrowinning

Electrowinning zinc in the system of zn(II)-NH3-NH 4CI-H2Q and mechanism of anodic reaction

Effect of Current Densities on the Electrochemical Behavior of a Flat Plate Pb-Ag Anode for Zinc Electrowinning

A Study of the Cathodic Current Efficency in Zincate Zinc Plating

An Experimental Investigation of Alkaline Zinc Electrowinning Using Magnesium Alloy As Cathode

Effects of Gelatin and Polyoxyethylene Ether on Zinc Electrowinning in a Zn(II)-NH4Cl-H2O System

The recovery of zinc from hot galvanizing slag in an anion-exchange membrane electrolysis reactor.

Selective Recovery of Lead from Zinc Oxide Dust with Alkaline Na2EDTA Solution

Influence of cetyltrimethylammonium bromide and sodium lauryl sulfate on production of zinc powders by alkaline electrowinning

Effect of Ammonium Nitrogen and Organic Impurities on Electrowinning Process of Zinc

Study on Electrowinning Zinc in Zn(II)NH_3-NH_4Cl-H_2O System

Effects of F - ions on the electrochemical and interface behavior of cathodes in zinc electrowinning

Production of ultrafine zinc powder from wastes containing zinc by electrowinning in alkaline solution

Zinc salt recovery from electroplating industry wastes by electrodialysis enhanced with complex formation

Particle Size Refinement of Zn Electrodeposits in Alkaline Zincate Solutions with Polyethylene Glycol and Tween 80

Electro-deposition experiment of electrolytic zinc rinsing wastewater

Effect of EDTA and NH 4 Cl additives on electrodeposition of Zn–Ni films from choline chloride-based ionic liquid

Toward Stable Zinc-Ion Batteries: Use of a Chelate Electrolyte Additive for Uniform Zinc Deposition

Research Progress in Anodes for Zinc Electrowinning

In-situ Constructing and EDTA-enhancing of Meta-Aluminate Passivation Films on Electroplated Zinc Surfaces

Effects of Diethanolamine and Tiethanolamine(ⅱ) on the Performance of Zinc Electrode