Abstract:The red clay is widely distributed in Guizhou province, which is characterized by high natural moisture content, difficult compaction and serious shrinkage and crackingin, and phosphogypsum is discharged for 5 million tons every year in Guizhou province. For the sake of effectively reducing the accumulation of phosphogypsum, mixtures were prepared with cement as a curing agent and mass ratios of cement to phosphogypsum of 1:1, 1:2 and 1:3 (low content phosphogypsum group) and phosphogypsum to red clay of 1:1, 1:2 and 1:3 (high content phosphogypsum group). Unconfined compressive strength, expansion, shrinkage and dynamic characteristic tests were conducted to analyze the behavior and mechanical properties of the mixtures. The modification mechanism of the mixtures by phosphogypsum was further explored by XRD (X-ray diffraction) and SEM (scanning electron microscopy). which provided a theoretical basis for the application of phosphogypsum in highway engineering and improved the engineering properties of red clay. The results show that the unconfined compressive strength of the phosphogypsum stabilized soil in the low content phosphogypsum group is greater than that in the high content phosphogypsum group. When cement:phosphogypsum = 1:2.2–1:3, the unconfined compressive strength of the mixture is maximum. When cement:phosphogypsum = 1:3, the maximum dynamic shear modulus of phosphogypsum stabilized soil is the largest. The absolute expansion rate and linear shrinkage rate of phosphogypsum stabilized soil in the low content phosphogypsum group are greater than those in the high content phosphogypsum group. When cement: phosphogypsum = 1:1–1:3, the absolute expansion rate is 6.5–12.3%, and the linear shrinkage rate is 1.3–2%. When red clay:Phosphogypsum = 1:1–1:3, the absolute expansion rate is 0.2–4%, and the linear shrinkage rate is 1–1.5%. The more phosphogypsum content, the smaller the expansion deformation and shrinkage deformation of the mixture. It is suggested that mass ratios of phosphogypsum to red clay is 1:1, and the cement content is 5%. Which can not only make full use of phosphogypsum solid waste, but also improve the engineering properties of red clay.

LABORATORY TEST FOR MECHANICAL PROPERTIES OF GUILIN RED CLAY MIXED WITH CEMENT

EXPERIMENTAL RESEARCH ON STABILIZATION OF RED CLAY WITH CEMENT AND FLYASH

Study on Mixing Cement-Waste By-Product to Stabilize Soft Marine Clay

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Study on the physical properties of red clay cured by different external admixtures combined with enzyme induced carbonate precipitation technology

Study on Mechanism of Muddy Soil Stabilization

Mechanical Properties and Microstructure of Lime-Treated Red Clay

Study on microscopic pores and physico-mechanical properties of red clay modified by calcium carbonate

Stabilization/solidification characteristics of organic clay contaminated by lead when using cement.

Dynamic Properties of Composite Cemented Clay.

Experimental Research on Static and Dynamic Characteristics of Cement Soil under Strain Control

Experimental Study on the Performance of Improved Collapsible Loess Mixture with Concrete Crushed Gravel

Research on Road Characteristics and the Microscopic Mechanism of Lime–Phosphogypsum-Stabilized Red Clay

Analysis of compressibility and mechanical behavior of red clay considering structural strength

Properties of Clay Mixed with Sticky Rice Juice and Tung Oil

Mechanical properties and modification mechanism of phosphogypsum stabilized soil

MECHANICAL BEHAVIOR OF CLAYEY SOIL TREATED BY NEW ONE-PHASE MICP TECHNIQUE

Enhancing the mechanical properties of marine clay using cement solidification

Performance Evaluation and Modification Mechanism of Red Clay Treated with Lignosulfonate

Mechanical Properties of Cement Soil Improved Using Microbial-Induced Calcite Precipitation