Abstract:A simply fabricated, highly sensitive, and inexpensive optical fiber temperature sensor is reported with a Fabry–Perot (FP) microcavity of controlled length. The microcavity with controllable length is fabricated by single-mode fiber (SMF) and polydimethylsiloxane (PDMS) for temperature sensing. After the PDMS is cured, the SMF is connected to the supercontinuum light source (SCLS) and the optical spectrometer analyzer (OSA) for online observation of the reflection spectrum. The micro-displacement platform is used to pull the SMF to form an air cavity. After the air cavity is stabilized, ultraviolet (UV) activated glue is used for packaging outside the PDMS. The FP microcavity is formed by the end face of the SMF and the face of PDMS. The length of the FP microcavity can be controlled online by the micro-displacement platform to a minimum of 15 µm. The free spectral range (FSR) may reach 74.8 nm and the interference fringe contrast (IFC) is up to 19.8 dB to allow sensitive measurements across a wide temperature range. The experiments demonstrate a high temperature sensitivity of 5.388 nm/°C from 33 to 93 °C with high repeatability and linearity (R2=0.9937). Stability experiments showed that the maximum changes in wavelength and intensity are only 45 pm and 0.035 dB, respectively. It is anticipated that the easily constructed, compact, and inexpensive fiber-optic temperature sensor will be employed in practical applications.

Miniature Fiber-Optic Temperature Sensors Based on Silica/polymer Microfiber Knot Resonators.

Miniature fiber-optic temperature sensors based on silica/polymer microfiber knot resonators

A Temperature Sensor Based on Optical Microfiber Knot Resonator

Miniature Interferometric Humidity Sensors Based on Silica/polymer Microfiber Knot Resonators

Interferometric Humidity Sensors Based on Microfiber Knot Resonators

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

Microscopic Multi-Point Temperature Sensing Based on Microfiber Double-Knot Resonators

Microfiber Resonators in the Linear and the Nonlinear Regimes

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Compact Optical Fiber Temperature Sensor with High Sensitivity Based on Liquid-Filled Silica Capillary Tube

Miniature Fiber-Optic Sensor for Simultaneous Measurement of Refractive Index and Temperature

Ultrasensitive Temperature Fiber Optic Sensor Based on a HO(Me2SiO)nH (silicone Rubber) Fabry–Pérot Cavity

Study on Electro-Optic Effect of Microfiber Knot Resonator

High Resolution Polymer/air Double-Cavity Fabry–Perot Fiber Temperature Sensor Based on Exposed Core Microstructured Fiber

Temperature Characteristics of Microfiber Coil Resonators Embedded in Teflon

Microfiber Fabry-Perot interferometer used as a temperature sensor and an optical modulator

Femtosecond Laser Microprinting of a Polymer Optical Fiber Interferometer for High-Sensitivity Temperature Measurement

Miniaturized fiber taper reflective interferometer for high temperature measurement.

A Miniature High-Temperature Fiber-Optic Sensor Based on Tip-Packaged Fabry-Perot Interferometer

High-temperature Sensor Based on Resonant Reflection in Hollow Core Fiber

Investigation of Temperature Dependence of Microfiber Coil Resonators