Abstract:Addressing issues such as the mass transfer characteristics and internal performance consistency of the air cooling (AC) proton exchange membrane fuel cell (PEMFC) stack. A full-scale AC metal bipolar plate (BP) stack is proposed in this study, comprising inlet and outlet manifolds, membrane electrode assembly (MEA), reaction flow field (FF) and cooling FF. The coupling of electrochemical reactions and heat and mass transfer processes in the stack is simulated using a non-isothermal multiphase numerical model. The characterization of the mass spatial distribution in the stack is explored by varying the stoichiometric ratio of the cathode gas, the thermal boundary conditions, the flow direction of the reaction gas and the air inlet flow configuration . According to the simulation results, it is found that, initially, the simulation errors in the one-dimensional (1D) AC stack are large and mainly concentrated in the concentration loss region. Subsequently, the increased stoichiometric ratio enhances the proton exchange membrane (PEM) water content, improves the local current density by 1.6% and facilitates the discharge of waste heat from the stack. Furthermore, thermal boundary conditions significantly affect the distribution of temperature uniformity in the stack, with high local temperatures causing significant water vapor generation and resulting in oxygen dilution. The counter-flow of hydrogen and air enhances the electrochemical reaction rates in the cathode catalyst layer (CCL) by 0.353%, with the lowest liquid water content in the seventh cell, influenced by the uneven distribution of manifold flow. Finally, changing the position of the cathode manifold gas inlet indicates that the positive flow of the cathode and AC inlets from the Z axis reduces the maximum stack temperature and water vapor by 1.04% and 0.38% respectively. The CCLs in Case 4 have optimal oxygen distribution and output voltages of approximately 0.66 V per fuel cell (FC).

Simulation analysis of thermo-mechanical coupling of PEMFC stresses

Simulation of the Dynamic Characteristics of a PEMFC System in Fluctuating Operating Conditions

3D multi-phase simulation of metal bipolar plate proton exchange membrane fuel cell stack with cooling flow field

Full-scale three-dimensional simulation of air cooling metal bipolar plate proton exchange membrane fuel cell stack considering a non-isothermal multiphase model

Thermal Management System Modeling and Simulation of a Full-Powered Fuel Cell Vehicle

A single-phase, non-isothermal model for PEM fuel cells

Investigation of Thermal Influence on the Assembly of Polymer Electrolyte Membrane Fuel Cell Stacks

Numerical Simulation and Analysis of Thermal Stress Distributions for a Planar Solid Oxide Fuel Cell Stack with External Manifold Structure

Numerical simulation of a mini PEMFC stack

Full-scale three-dimensional simulation of air-cooled proton exchange membrane fuel cell stack: Temperature spatial variation and comprehensive validation

A model predicting performance of proton exchange membrane fuel cell stack thermal systems

Investigation of the assembly for high-power proton exchange membrane fuel cell stacks through an efficient equivalent model

Study on the Heat and Mass Transfer Mechanisms of Liquid-Cooled PEMFC Stacks Based on Non-Isothermal Model

Dynamic cross-scale modeling and thermo-electric response characteristics of PEMFC based on standardized thermal resistance

Transient Thermomechanical Analysis of a Solid Oxide Fuel Cell Stack Based on 3D Multiphysical Field Model

Thermal Stress and Contact Analysis Utilizing Tested Temperature Data in a Kw-Class External-Manifold Solid Oxide Fuel Cell Stack

An analysis of the temperature test of proton exchange membrane fuel cell

Dynamic Thermal Model and Temperature Control of Proton Exchange Membrane Fuel Cell Stack

Numerical Analysis of Thermal Stress for a Stack of Planar Solid Oxide Fuel Cells

Numerical simulation for rib and channel position effect on PEMFC performances

Investigation of the Ambient Temperature Influence on the PEMFC Characteristics: Modeling from a Single Cell to a Stack