Abstract:In order to balance the cost performance of carbon and glass fibers, the unidirectional carbon/glass hybrid fiber reinforced polymer composite rods were developed through the pultrusion technology in the present paper. Two kinds of fiber hybridization types were proposed including intra-yarn hybrid (uniform dispersed hybrid, UDH) and inter-layer hybrid (core-shell hybrid, CSH). Furthermore, the effects of fiber hybridization types on the mechanical properties (interface/short beam shear strength, three-point bending strength and tensile strength) were investigated experimentally. The full-field strain was obtained through the digital image correlation method to reveal the hybrid mechanism. It was found that the effects of fiber hybridization types on mechanical properties were remarkable. Through uniformly dispersing the carbon fiber into the glass fiber, the maximum increase percentages of available strength were up to 10.9% for short beam shear, 60.3% for three-point bending and 58.7% for tensile strength, respectively. The results of full-field strain analysis revealed that the mechanical failure of CSH rods was dominant by the interface debonding of shell/core, which significantly decreased the mechanical properties. In comparison, UDH rods had the intact interface bonding of carbon/glass fiber/resin, the mechanical failure was derived from the fracture of carbon fiber. The tensile strength of carbon fiber was fully utilized, which contributed to the higher mechanical properties. The larger scale carbon fiber tow may form the weaker interface layer of carbon/glass fiber/resin, which led to uneven interface stress distribution under the external loading and the decrease of interface shear strength.

Effect of Ratio of Non-Woven Cloth to Short-Cut Fiber Web of the Preform on the Flexural Properties of C/C Composites

Effects of needle-punched felt structure on the mechanical properties of carbon/carbon composites

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Influence of Fiber Type on Mechanical Properties of Lightweight Cement-Based Composites

Effect of PE Fiber Content on Mechanical Behavior of Cementitious Composite

Tensile Properties Hybrid Effect of Unidirectional Flax/carbon Fiber Hybrid Reinforced Polymer Composites

Effects of preform structure on microstructure and mechanical properties of long/short fiber‐coupled C/C–SiC composites

EFFECT OF CARBON NANOFIBERS ADDITION ON DENSIFICATION AND MECHANICAL PROPERTIES OF CARBON/CARBON COMPOSITES

Experimental study on mechanical behavior of PE fiber cementitious composite

Mechanical Properties Investigation of Carbon/carbon Composites Fabricated by a Fast Densification Process

Effect of Different Z-directional Fibers on Mechanical Properties of Composites Using Numerical and Experimental Tests

Effect of fiber hybridization types on the mechanical properties of carbon/glass fiber reinforced polymer composite rod

Effect of stable-structural 3D woven preform on tensile and flexural properties of carbon fiber/epoxy composites

The Effect of Structural and Process Parameters on the Effective Properties of Polymer Composites Reinforced by Fiber-rod and Three-dimensional Weaving

Experimental Study of Mechanical Properties of 3D Braided Aramid/carbon Fiber Composites

Quasi‐static compression properties of fiber hybrid ceramic matrix composites with different hybrid ratios and fiber dispersions

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

Influence of Fiber Surface Treatment on Mechanical Properties of CF/PET Composites

Effect of Carbon Particle and Carbon Fiber on the Microstructure and Mechanical Properties of Short Fiber Reinforced Reaction Bonded Silicon Carbide Composite

The Effect of Fiber Preform Configuration on In-Plane Compressive Behavior of High Porosity Needled Carbon/carbon Composites in Elevated Temperature Environment