Abstract:Wide-viscosity-range impellers have extensive demands and applications in process industry. The gas–liquid dispersion and mass transfer characteristics of wide-viscosity-range impellers including Large-double-blade (LDB) impeller, Fullzone (FZ) impeller and Maxblend (MB) impeller in water solutions of xanthan gum were investigated experimentally and compared. The influences of gas flow rate, impeller speed and polymer concentration of liquid on the power consumption, overall gas holdup εg and mass transfer coefficient KLa were also analyzed. On this basis, the appropriate operating parameters and impeller type were determined. The results indicate that with rising flow rate, the higher εg and KLa can be achieved with a drop in power consumption, and a relatively high flow rate is recommended on the premise of guaranteeing the complete dispersal condition in aerated vessel. Higher impeller speed provides better gas–liquid dispersion and mass transfer performance, but results in more power consumption simultaneously. The appropriate impeller speed should be just enough to meet the requirements of εg and KLa. It also is found that the increasing concentration of water solution of xanthan gum adds to the complexity of gas dispersion and mass transfer in aerated vessel. Under the same specific power consumption PV, the εg and KLa are positive and negative correlation with the polymer concentration of liquid, respectively. Specially, when the concentration of water solution of xanthan gum is relatively low, the FZ impeller exhibits the best gas dispersion and mass transfer performance under the same specific power consumption. Nevertheless, the mass transfer performance of FZ impeller deteriorates significant when the concentration of water solution of xanthan gum increases to 1.00 wt%, and the MB impeller becomes the most appropriate impeller type in this condition.

Gas-Liquid Dispersion and Mixing Characteristics and Heat Transfer in A Stirred Vessel

Study on Local Gas-Liquid Dispersion in Dual-Impeller Aerated Stirred Vessel

Computational Fluid Dynamics Simulation of Bubble Size and Local Gas Holdup in Stirred Vessel

Effect of Agitation on the Fluidization Behavior of a Gas–solid Fluidized Bed with a Frame Impeller

Research progress of gas dispersion in stirred vessel with medium or high viscosity fluids

Investigation of Gas–liquid Dispersion and Mass Transfer Performance of Wide-Viscosity-range Impellers in Water Solutions of Xanthan Gum

The Influence of Impeller Combination on the Gas-Liquid Dispersion Performance of a Coaxial Mixer in Viscous Fluids

Experimental Study on Gas–liquid Dispersion and Mass Transfer in Shear-Thinning System with Coaxial Mixer

Local gas-liquid dispersion properties in a dual-impeller stirred vessel

CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer

Gas-Liquid Floating Particle Mixing in an Agitated Vessel

Experimental Investigation on Solid Particle Distribution in Dense Solid–liquid Stirred Tank

Experimental Study on Coaxial Mixer Based on Critical Uniform Dispersion of Floating Particles

Study on the Numerical Model of Gas-Liquid Dispersion Driven by a Coaxial Mixer

Experimental Study on the Mixing and Dispersing of Floating Particles in Viscous System

CFD Simulation of the Mixing and Dispersing of Floating Particles in a Viscous System

GAS DISPERSION AND SOLID SUSPENSION IN A THREE-PHASE STIRRED TANK WITH MULTIPLE IMPELLERS

Gas–liquid mixing performance of a non‐Newtonian fluid in a multiple‐impeller agitated tank

Gas-liquid Mixing Performance, Power Consumption, and Local Void Fraction Distribution in Stirred Tank Reactors with a Rigid-Flexile Impeller

Design of Impeller Blades for Intensification of Gas-Liquid Dispersion Process in a Stirred Tank

Numerical Simulation of Gas-Liquid Dispersion in A Stirred Tank Agitated by Punched Rigid-Flexible Impeller