Abstract:Purpose/Aim: Acrylamides are hydrolytically stable at pH lower than 2, and were shown to preserve bonded interface integrity with two-step, total etch adhesives. The objective of this study was to leverage those two characteristics in self-etching primers containing the acidic monomer 10-MDP and test the microtensile bond strength before and after incubation with S. mutans incubation. Materials and Methods: Acidic primers (10 wt % 10-methacryloyloxydecyl dihydrogen phosphate─10-MDP; 45 wt % N,N-diethyl-1,3-bis(acrylamido)propane─DEBAAP, or 2-hydroxyethyl methacrylate─HEMA; 45 wt %, glycerol-dimethacrylate─GDMA) and adhesives (DEBAAP or HEMA/10-MDP/UDMA 45/10/45 wt %) were made polymerizable by the addition of 0.2 wt % camphorquinone, 0.8 wt % ethyl-4-dimethylaminobenzoate, 0.4 wt % diphenyliodonium hexafluorophosphate, and 0.1 wt % butylhydroxytoluene. Nonsolvated materials were characterized for flexural strength (FS), modulus (E), toughness, water sorption/solubility (WS/SL), contact angle, and vinyl conversion (DC). Viscosity was evaluated after adding 20 and 40 vol % ethanol to the primer and adhesive, respectively. The experimental materials or Clearfil SE Bond (CC─commercial control) were used to bond a commercial composite (Filtek Supreme) to the flat surface of human dentin. Microtensile bond strength (MTBS) was tested in 1 mm2 sticks for the 5 primer/bond combinations: CC (Clearfil Bond Primer and Bond), HH (HEMA/HEMA), DD (DEBAAP/DEBAAP), HD (HEMA/DEBAAP), and DH (DEBAAP/HEMA). Prior to testing, sticks were stored in water or biofilm-inducing culture medium with S. mutans for 1 week. Confocal images and FTIR-ATR evaluation evaluated the hybrid layer of the adhesives. Results were analyzed using Student's t-test (WS, SL, DC, contact angle, FS, E, toughness), one-way ANOVA/Tukey's test for viscosity, and two-way ANOVA/Tukey's test for MTBS (95%). Results: HEMA-based materials had lower contact angle (p = 0.004), higher WS (p < 0.001), and similar SL values compared to DEBAAP (p = 0.126). FS (p = 0.171) and E (p = 0.065) dry values were similar, but after one week of water storage, FS/E dropped more significantly for HEMA materials. Dry and wet toughness was greater for DEBAAP (p < 0.001), but it also had the greatest drop (46%). Clearfil bonds had the highest viscosity, followed by DEBAAP and HEMA, respectively (p = 0.002). For the primers, HEMA had the lowest viscosity (p = 0.003). As far as MTBS, all groups tested in water were statistically different when compared with HH (p < 0.001). After storage in biofilm, DH had the highest MTBS value, being statistically different from HH (p = 0.002), CC (p = 0.015), and DD (p = 0.027). Conclusions: The addition of a diacrylamide and its association with HEMA in self-etching adhesive systems provided greater bonding stability after bacterial challenge.

Evidence of Chemical Bonding to Hydroxyapatite by Phosphoric Acid Esters

Evidence of chemosorption of enamel by self-etching primers containing phosphoric acid esters

Do Phosphoric Acid Esters Affect the Immediate Enamel Bond Strengths?

Nanolayering of phosphoric acid ester monomer on enamel and dentin

Effects of Phosphoric Acid Pre-Etching on Chemisorption between Enamel and MDP-Containing Universal Adhesives: Chemical and Morphological Characterization, and Evaluation of Its Potential

Bis[2-(Methacryloyloxy) Ethyl] Phosphate as a Primer for Enamel and Dentine

Reconstruction of a Demineralized Dentin Matrix Via Rapid Deposition of CaF2 Nanoparticles in Situ Promotes Dentin Bonding.

Improved bond performances of self-etch adhesives to enamel through increased MDP–Ca salt formation via phosphoric acid pre-etching

Chemical interaction between 10-methacryloyloxydecyl dihydrogen phosphate and methacryloxypropyltrimethoxysilane in one-bottle dental primer and its effect on dentine bonding

Evidence of Chemisorption of Maleic Acid to Enamel and Hydroxyapatite

Interactions of two phosphate ester monomers with hydroxyapatite and collagen fibers and their contributions to dentine bond performance

Interfacial Interaction of Tartaric Acid with Hydroxyapatite and Enamel

Effect of phosphoric acid containing polyvinylpyrrolidone as protective etchant for dentin bonding

Bonding efficacy of polyalkenoic acids to hydroxyapatite, enamel and dentin

The contribution of chemical bonding to the short- and long-term enamel bond strengths.

Prime-and-rinse Approach for Improving the Enamel Micro-Tensile Bond Strengths of Self-Etch Adhesives

Effect of nanolayering of calcium salts of phosphoric acid ester monomers on the durability of resin-dentin bonds

Selective demineralisation of dentine extrafibrillar minerals—A potential method to eliminate water-wet bonding in the etch-and-rinse technique

Effect of a Novel Prime-and-rinse Approach on Short- and Long-Term Dentin Bond Strength of Self-Etch Adhesives.

Stability of the Dentin-Bonded Interface Using Self-Etching Adhesive Containing Diacrylamide after Bacterial Challenge

The Effect of Prime-and-rinse Approach Using MDP Micellar Solutions on Extrafibrillar Demineralization and Dentin Bond Performance.