Novel Method for Printing High-Quality Metal Wires

Jun Xu

DOI: https://doi.org/10.1117/2.1200712.0969

2007-01-01

SPIE Newsroom

Abstract:The inkjet printing (IJP) technology known as drop on demand (DOD) (see Figure 1) is regarded as one of the most powerful methods for creating organic electronic devices such as light-emitting diodes, thin film transistors, biosensors, and color filters.1, 2 For commercial applications, these tools need to be made with low thickness and high performance, as well as inexpensively and on large scale. In particular, DOD IJP offers a powerful means of printing the metal wires used in flexible electronic devices. Silver or gold wires with complicated patterns and low resistivity can easily be produced using DOD IJP at dramatically reduced cost, as the need for photolithography and vacuum processes is eliminated. Compared with traditional integrated circuit manufacturing methods, DOD IJP also offers many other advantages, such as simplicity of pattern design and environmental friendliness. It therefore represents a versatile method of depositing various organic materials. Producing thin films using DOD IJP does have disadvantages, however, and chief among them is the so-called coffee-ring effect.3 This produces a circular mark on the substrate caused by the fluid flow of a liquid drop within the deposited area. Because the coffee-ring effect strongly affects the uniformity of the film’s thickness, and consequently its physical and electrical properties, many studies have focused on suppressing it.4 Yet the solutions proposed so far are often too complicated to be practical. Inspired by previous work,5 we have developed a novel and simple thin-film printing method, called self-bank, which could greatly improve the performance of metal wires in organic electronic devices. The self-bank method involves several steps. A uniform film of polymethylmethacrylate (PMMA) is formed as a barrier layer on a glass substrate by spin coating. Meanwhile, silver nanoparticles are dispersed in a special solvent, forming a nanoparticle fluid suspension (NPFS). When this silver NPFS is injected by syringe or printed by IJP onto the PMMA layer, Figure 1. A typical setup for DOD inkjet printing (IJP).