An approach to employ titanium-bearing blast-furnace slag to prepare Ti and Al–Si alloys
Yun Lei,Luen Sun,Wenhui Ma,Xiaodong Ma,Jijun Wu,Shaoyuan Li,Kazuki Morita
DOI: https://doi.org/10.1016/j.jallcom.2018.08.077
IF: 6.2
2018-01-01
Journal of Alloys and Compounds
Abstract:Ti-bearing blast-furnace slag is a metallurgical waste but a promising Ti resource. In this study, Ti and Al-Si alloys can be prepared directly by separating a Ti-Si-Al alloy that was prepared by reducing Ti and Si from Ti-bearing blast-furnace slag with Al. The technology of directional solidification with electromagnetic force was employed to carry out the separation of the Ti-Si-Al alloy. When additions of CaO and Al were 24 wt% and 40 wt%, respectively, the composition of the obtained Ti-Si-Al alloy was 31.8 wt % Ti, 22.7 wt% Si, 28.5 wt% Al, and 10.2 wt% Fe. Ti5Si4, TiSi, Al-Si-Ti (tau(2)), Al-Si-Fe (tau(4)), and Al-Si alloys were prepared in sequence after separating the Ti-Si-Al alloy using directional solidification with electromagnetic force. However, when the composition of the Ti-Si-Al alloy was changed to 21.2 wt% Ti, 48.5 wt% Si, 19 wt% Al, and 6.8 wt% Fe, the TiSi2, Si, Al-Si-Fe and Al-Si alloys were prepared in sequence. This study will propose an approach to employ the metallurgical waste, titanium-bearing blast-furnace slag, to prepare Ti and Al-Si alloys. (C) 2018 Elsevier B.V. All rights reserved.