A Computational Fluid Dynamics Approach for Full Characterization of Muffler Without and with Exhaust Flow
L. Y. Liu,X. Zheng,Z. Y. Hao,Y. Qiu
DOI: https://doi.org/10.1063/5.0008340
IF: 4.6
2020-01-01
Physics of Fluids
Abstract:Compared to the linear frequency domain method, the transient Computational Fluid Dynamics (CFD) method is more effective when analyzing the effect of complex flow in the muffler on its acoustic characteristics. However, most of the existing CFD methods focus on the calculation of the transmission loss (TL) for the muffler only. The other evaluation parameters, such as noise reduction (NR), are rarely investigated. In this paper, a CFD approach was developed systematically for charactering TL, NR, and transfer matrix (TM) of the muffler in the cases without and with exhaust flow. In the proposed approach, only one mesh model with a correction pipe is needed based on two simulation runs. The non-reflective boundary was used as the termination of the correction pipe in the calculation for the TL, while the reflective pressure boundary was set on the correction pipe end in the calculation for the NR. The TM was then derived from the time-domain pressure and mass velocity obtained in the previous runs for calculating TL and NR. The proposed CFD approach was applied to two simple expansion chambers, and the computational predictions of TL, NR, and TM were validated successfully both with the measured results and the analytical results. In conclusion, the proposed CFD approach is effective for full characterization (TL, NR, and TM) of exhaust mufflers without and with exhaust flow.