Abstract:Biomass is a green source of power since it has minimal to no impact on biodiversity and offers global security for ecological sustainability. Gasification is a thermochemical procedure that turns a source into a by-product (fuel gas). Biomass has an edge over carbon fuels because it is sustainable. It acts as a steady source of feedstock and works as a viable candidate for energy production because it is sustainable. A few other negative repercussions of their extraordinary use include the persistent unpredictability of demand and supply for fossil fuels, environmental harm, and the consequences of climate change. Different factors, such as temperature, particle size, biomass composition, gasifier design, operating conditions, etc., have an impact on a biomass gasifier's efficiency. During gasification, a number of simultaneous reactions actually happen, and some components can serve as both reactants and products. We are reporting for the first time the optimization of biomass mixture (sugarcane bagasse and sawdust) along with equivalence ratio and air flow rate. Preliminary experiments were conducted to ascertain the range and levels of operations of three factors, such as equivalence ratio (ER), air flow rate, and biomass ratio. Optimization involving Box-Behnken design was utilised to decipher the effect of three influencing parameters such as biomass mixture of sugarcane bagasse and sawdust (25%, 50%, and 75%); low air flowrates (10.5, 13.0, and 16.5 L/hr) and equivalency ratios (0.2, 0.3, and 0.4) on gas yield, tar yield, and gas heating value of biomass using an Intrinsic circulating fluidized-bed reactor. All stochastic parameters validated our model. An optimal gas yield, tar yield, and gas heating value of 1.881 Nm3/Kg, 11.360, and 8.188 were predicted at an equivalence ratio (ER) of 0.3, air flow rate of 16.5 L/h, and biomass ratio of 0.75 (75% sugarcane bagasse to 25% sawdust ratio) at a desirability of 1.00. The experimental values were found to be: gas yield (1.867 Nm3/Kg), tar yield (14.0 g/Nm3), and gas heating value (8.15 MJ/Nm3). Trialswere conducted in-order to warrant the predicted circumstancesand the results were found to be correlated with experimental values. Keywords Gasification, gas yield, tar yield, gas heating value, biomass combination.

Optimization of the Gasification Process in Fluidization of Pulverized Coal Based on Response Surface Method

A Summary on Acceptance of a Model for Commercialization of Circulated Fluid Bed Gasification of Pulverized Caol

Examination of Industrial Demonstration Unit of Coal Gasification for Pulverized Coal with Ash Agglomeration Technique

Influences of Operating Parameters on the Fluidized Bed Coal Gasification Process: A Coarse-Grained CFD-DEM Study

Optimization and Performance Prediction of a New Near-Zero Emission Coal Utilization System with Combined Gasification and Combustion

Study of the Gasification Characteristics of a New Type Dry Pulverized-coal GFB (Gas Fluidized Bed) Gasifier

Numerical Analysis for Coal Gasification Performance in a Lab-Scale Gasifier: Effects of the Wall Temperature and Oxygen/Coal Ratio

A Complex Evaluation and Optimization Approach for Oxygen-Enriched Combustion Characteristics of Blended Fuels Based on Response Surface Methodology

Experimental Study on Combining Partial Gasification With Air on a Fluidized Bed at Atmospheric Pressure and Semi-coke Combustion

CFD simulation of air-blown coal gasification in a fluidized bed reactor with continuous feedstock

Effective Pretreatment of Corn Straw Biomass Using Hydrothermal Carbonization for Co-Gasification with Coal: Response Surface Methodology–Box Behnken Design

An Experimental And Response-Surface-Based Optimization Approach Towards Production Of Producer Gas In A Circulating Fluidized Bed Gasifier Using Blends Of Renewable Fibre-Based Biomass Mixtures

Optimization of Flotation Conditions for Long-Flame Coal Mud by Response Surface Method

Numerical simulation of a new two-stage dry feed gasifier for double-high coal

Thermal Conversion, Kinetics, Thermodynamics and Empirical Optimization of Combustion Performance of Coal Gasification Fine Ash in Oxygen-Enriched Atmosphere

Numerical simulation of gasification characteristics in a circulating fluidized bed biomass gasifiers

Study on a comprehensive model for pollutant emission and desulfurization during the gasification of coal in a steam fluidized bed and discussion on the parameters estimation

Study on coal gasification in steam fluidized bed

Simulation of Heat and Mass Transfer in Pulverized Coal Boiler Based on Gaseous Combustion Through Phase Separation Technique

Optimization of supercritical water oxidation for coal-gasification wastewater treatment using response surface methodology

EXPERIMENTAL STUDY ON GASIFICATION IN DUAL FLUIDIZED BEDS