Abstract:The mechanical behaviors of composite rock masses containing a complex interface widely distributed in nature are significantly different from those of monolithic rock masses. The objective of this study is to perform a series of uniaxial compression tests to study the influence of sawtooth interface parameters on the fracture behavior of rock-like composite specimens. Meantimes, the acoustic emission (AE) and digital image correlation (DIC) technique were used to classify damage stages and record strain field evolution, respectively. The results of this study demonstrate that stress-strain curves of composite rock-like specimens with different sawtooth interfaces display characteristics of plastic failure, friction failure characteristics and two different brittle failure characteristics in the post-peak phase. The peak strength of the specimen first decreases and then increases as the inclination of the interface increases, achieving the maximum value of 28.29 MPa at the inclined interface of 90°. The strain concentration zone is mainly generated and expanded around the interface. The parameters of the sawtooth have a significant influence on the type and location of cracks developed along the interface. In addition, there is a strong relationship between the mode of failure of the specimen and the strength of the rock layer and the inclination of the interface. According to the relative positional relationship between the coalescence path of the specimen and the interface, the failure modes of the specimen are classified as single weak rock layer failure (S-AB-0, S-AB-15), oblique failure through rock layer interface (S-AB-30, S-AB-45), slip failure along the interface (S-AB-60, S-AB-75) and axisymmetric failure along the interface (S-AB-90). This result is of great importance for a thorough understanding of the crack coalescence mechanism and strain field evolution of rock-like composite specimens.

Numerical Study On The Effects Of Hierarchical Wavy Interface Morphology On Fracture Toughness

Role of Interfacial Transition Zones in the Fracture of Cu/V Nanolamellar Multilayers

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Fracture and Toughening Mechanisms in Nanotwinned and Nanolayered Materials

Fracture of Soft Materials with Interfaces: Phase Field Modeling Based on Hybrid ES-FEM/FEM

Fracture Toughness of Biological Composites with Multilevel Structural Hierarchy

Geometry and material constraint effects on fracture resistance behavior of bi-material interfaces

Fracture Analysis of Shear Deformable Bi-Material Interface

A multiscale analytical framework for mode I crack in staggered composites

The effect of interface properties on the mechanical behaviour of 3D braided composites under unidirectional tensile loading

Equilibrium state of mode-I sub-interfacial crack growth in bi-materials

Study on Elastic Mixed Mode Fracture Behavior and II-III Coupling Effect

Strain field evolution and crack coalescence mechanism of composite strength rock-like specimens with sawtooth interface

Numerical analysis of interaction and coalescence of numerous microcracks

In Situ Study on the Hierarchical Interfacial “global Regulation – Equilibrium Iteration” Bearing-Toughening Mechanisms in Strombus Gigas Shell by Synchrotron Radiation Computed Tomography Technique

Fracture Toughness of a Corrugate Interface Between Two Dissimilar Materials

Influences of Interface Properties and Coating Thickness on Fracture Behaviors of Coating/substrate Systems

Effect of interfacial energy combined with geometrical nonlinearity on the finite fracture analysis of composite single-lap joints

Phase-field modeling of ductile fracture in bioinspired interfaces with dissipative structures

A Numerical Study of the Influence of Interface Morphology on the Stress Behavior in Thermal Barrier Coatings Near an Inclined Film-Cooling Hole