Abstract:This study develops a method coupling the finite element method (FEM) and the scaled boundary finite element method (SBFEM) for fully-automatic modelling of cohesive crack growth in quasi-brittle materials. The simple linear elastic fracture mechanics (LEFM)-based remeshing procedure developed previously is augmented by inserting nonlinear interface finite elements automatically. The constitutive law of these elements is modelled by the cohesive/fictitious crack model to simulate the fracture process zone, while the elastic bulk material is modelled by the SBFEM. The resultant nonlinear equation system is solved by a local arc-length controlled solver. The crack is assumed to grow when the mode-I stress intensity factor KI vanishes in the direction determined by LEFM criteria. Other salient algorithms associated with the SBFEM, such as mapping state variables after remeshing and calculating KI using a “shadow subdomain”, are also described. Two concrete beams subjected to mode-I and mixed-mode fracture respectively are modelled to validate the new method. The results show that this SBFEM–FEM coupled method is capable of fully-automatically predicting both satisfactory crack trajectories and accurate load–displacement relations with a small number of degrees of freedom, even for problems with strong snap-back. Parametric studies were carried out on the crack incremental length, the concrete tensile strength, and the mode-I and mode-II fracture energies. It is found that the KI⩾0 criterion is objective with respect to the crack incremental length.

Equilibrium state of mode-I sub-interfacial crack growth in bi-materials

Subinterfacial Crack Growth in Bimaterials

Numerical simulation of interfacial and subinterfacial crack propagation by using extended peridynamics

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Development of X-FEM Methodology and Study on Mixed-Mode Crack Propagation

Monte Carlo Simulation of Complex Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials: A 3D Study

Development X-FEM to investigate crack propagation in inhomogeneous materials

A Closed-Form Solution to the Mechanism of Interface Crack Formation with One Contact Area in Decagonal Quasicrystal Bi-Materials

Peridynamic analysis of materials interface fracture with thermal effect

Mechanics of dynamic debonding

Fully-automatic Modelling of Cohesive Crack Growth Using a Finite Element–scaled Boundary Finite Element Coupled Method

A modified phase-field model for cohesive interface failure in quasi-brittle solids

Computational analysis of mixed-mode fatigue crack growth in quasi-brittle materials using extended finite element methods

DYNAMIC FRACTURE ANALYSIS OF CRACK AT BIMATERIAL INTERFACE

Numerical analysis of interaction and coalescence of numerous microcracks

Characteristics of crack growth in brittle solids with the effects of material heterogeneity and multi-crack interaction

Investigation of Stress Intensity Factors for an Interface Crack in Multi-Interface Materials Using an Interaction Integral Method

Peridynamic modeling of elastic bimaterial interface fracture