Abstract:Recent studies on jet penetration height in literature were reviewed. Double-jet penetration in fluidized beds was investigated both experimentally and numerically. The experimental investigation was performed in a 300×51 mm two-dimensional gas–solids fluidized bed with two vertical jets, and the jet penetration height was measured. Different kinds of particles were tested in turn. The numerically predicted jet penetration heights were from the solution of a hydrodynamic model describing the gas–solids fluidization. The hydrodynamic model is based on the kinetic theory for fluidization and K–εk turbulence model for gas phase. The governing partial differential equations were solved using the modified Inter Phase Slip Algorithm (IPSA) method. The formation mechanism of jets was analyzed and the interaction of two vertical jets was reconstructed using this model. Numerical results indicated that the flow pattern of a two-jet system could be classified into three categories: isolated jets, transitional jets, and interacting jets. The criterions for those flow regions were found. The effects of jet characteristics (jet velocity, nozzle width, and the distance between two jets), particle properties (particle diameter, particle sphericity, and particle density), fluidizing gas characteristics (superficial gas velocity of bed, inlet gas density, and gas viscosity), and bed height on the jet penetration height were analyzed. It was found that the dominant factors affecting the jet penetration height are jet momentum, the drag between the two phases, entrainment near the jet neck, the distance between two jets, and the superficial gas velocity. Thus, the Froude number, Reynolds number, superficial gas velocity, the distance between the two jets, and jet nozzle width are used to propose algebraic empirical equations to estimate the jet penetration height of gas–solids fluidization at different jet regions. The empirical equations were compared with published experimental data or correlations.

Gas Discharge Patterns in a Large Jetting Fluidized Bed with a Vertical Nozzle

Flow Pattern Transition in a Large Jetting Fluidized Bed with Double Nozzles

Dispersion Trajectory and Dynamics of Particles Injected from the Sidewall in the Gas–Solid Fluidized Bed

Hydrodynamics of Large Jetting Fluidized Bed.

A Volatile Spray Zone Model and Experimentation in a Gas-Solid Fluidized Bed with Liquid Injection

FLOW REGIME TRANSITION AND PENETRATION DEPTH OF LARGE JETTING FLUIDIZED BED

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Classification and Identification of Gas–liquid Dispersion States in a Jet Bubbling Reactor

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Detection of gas-liquid dispersion in jet bubbling reactor

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

Flow Characteristics in A Large Jetting Fluidized Bed with Two Nozzles

Study on Jet Flow from Two Vertical Nozzles in A 500 Mm Id Semi-Circular Fluidized Bed

Numerical and Experimental Study of Integral Multi-Jet Structure Impact on Gas-Solid Flow in a 3D Spout-Fluidized Bed

Experimental Study on Gas-Liquid Flow Characteristics of Submerged Air Jets

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

HYDRODYNAMIC CHARACTERISTICS IN LARGE JETTING FLUIDIZED BED WITH DOUBLE NOZZLES

Hydrodynamic characteristics of a two-dimensional jetting fluidized bed with binary mixtures

Chaotic Study in a Large Jetting Fluidized Bed with a Vertical Nozzle

On the jet penetration height in fluidized beds with two vertical jets

Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach