Abstract:Mg(BH4)2 was previously studied as a promising hydrogen storage material, because of its high gravimetric storage capacities for hydrogen and suitable thermodynamic properties. Mg(BH4)2 began to decompose at about 300 ℃, and formed MgB2 at the end of hydrogen desorption process with the weight content of 14.9% of hydrogen lost. Aside from the prominent hydrogen storage property, the decomposition process from Mg(BH4)2 to MgB2 can be a potential method for fabricating superconducting MgB2 at a low sintering temperature. In this paper, MgB2 bulk was prepared by an in-situ reaction, using the Mg(BH4)2 pressed block as a precursor. The resistance change of the sample was monitored during the Mg(BH4)2 decomposition process and the resistance-temperature (R-T) curve of this process was recorded. Phase of MgH2, Mg and B were formed as the block slowly release its hydrogen before MgB2 occurred. According to the R-T curve, the phase formation of MgB2 started in a relatively low temperature of 410 ℃. Because MgB2 was critically formed by Mg and B derived from Mg(BH4)2, we can compare our formation temperature with previous study on MgB2 prepared by Mg and B in different particle size. The fitting result indicated that the particle size of Mg and B harvest from Mg(BH4)2 decomposition was only 3.4 nm on average. The nearly atomic level mixture of Mg and B resulted in a high chemical reactivity, which was the main reason for low sintering temperature. X-ray diffraction results showed that the purity of MgB2 was 95.2%, and the size of MgB2 grains was 10–18 nm. SEM images showed that the MgB2 bulk had a porous structure and poor connectivity, which was caused by large amount the hydrogen release during the decomposition. MgB2 nanofibers can also be observed inside the bulk. In the superconductivity test, the superconducting transition temperature of the bulk was 35 K. After all, such in situ method to fabricate MgB2 showed a great advantage in some aspects, as its low-cost precursors, low sintering temperature, small grain-size and high superconducting transition temperature in the formed MgB2, which have the potential in industrial scale fabrication of MgB2 bulks and wires.

Experimental Study on Phase Transformation Between Mgb2 and Mgb4

EXPERIMENTAL STUDY ON THE PHASE RELATIONS OF THE SYSTEM Mg2SiO4-MgAl2O4 AT HIGH PRESSURE AND HIGH TEMPERATURE

Experimental Study on the Phase Formation for the Mg-B System in Ar Atmosphere

Influence of Mg and B Stoichiometry on the Formation Behavior of MgB2 Phase

Thermodynamic Research on Phase Formation of Mg-B System

Infiltration Effect of Mg with Different Matter States in the Reaction of MgB2 Bulks

Ab-Initio Investigation of Anisotropic Optical Properties of Mgb2

The Size Effect of Raw Materials on the Phase Formation of Polycrystalline Mgb2

Influence of Raw Mg Powder Shape on Behavior of Phase Formation for Mg-B System

Experimental investigation and thermodynamic assessment of the Mg–Gd–Ag system focused on Mg-rich region

Infiltration effect of Mg with different matter states in the reaction of MgB 2 bulks

Effect of carbon doping on the formation and stability of MgB2 phase

Synthesis of Ultrafine Superconducting Mgb2 by A Convenient Solid-State Reaction Route

Effect of Mg Content in Precursors on the Volume Expansion of MgB2 by Two-Step Reaction Method

Modeling of the phase evolution in Mg1-xAlxB2 (0 < x < 0.5) and its experimental signatures

A Novel Gas–solid Reaction Process to Synthesize Low Oxygen MgB2 Powder Using Mg Vapour

Preparation And Characterization Of The New Superconductor Mgb2

Re-investigation of the Phase Equilibria and Thermodynamic Assessment of the Mg-Sm Binary System

In Situ Resistance Analysis of MgB2 Formation Process from Mg(BH4)2

Phase formation of polycrystalline MgB2 at low temperature using nanometer Mg powder

Study of the Reactions Between MgB2 and Ag at High Temperature