Abstract:The nickel-based hardfacing alloys with different Mo contents have been deposited on Q235-carbon steel using a plasma transferred arc (PTA) welding machine. The effects of Mo on the microstructure and wear resistance properties of the nickel-based hardfacing alloys were investigated using optical microscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD). More detailed information about the crystallographic structure and phase compositions of the deposited coatings was obtained with the application of Rietveld refinement method to analyze XRD spectra. It was found that the addition of Mo did not lead to a change in phase compositions. Furthermore, it can also be seen that the relative contents of the total Cr-rich compounds increased from 36 wt.% to 45 wt.%, though the M23C6 type carbide increased but the relative contents of the M7C3 type carbide decreased with the increasing of Mo contents from 0 wt.% to 6 wt.%. The component segregation, which existed in the Mo-free coating, decreased gradually then disappeared finally with the increasing of Mo contents. The morphology of Cr-rich compounds observed in the interdendritic region changed from plate-like to net-like, as well as the refinement of Ni-rich dendrites because of the addition of Mo. The wear resistance increased but the microhardness decreased with the increasing of Mo contents from 0 wt.% to 6 wt.%. The microstructural change and phase contents variation were responsible for the improvement of the mechanical properties such as wear resistance of the Mo-modified nickel-based hardfacing alloy.

EFFECT OF CrMoN HARD COATINGS WITH DIFFERENT COM-POSITIONS ON THE SURFACE PROPERTIES OF DIE STEELS

Structural, mechanical and tribocorrosion performances of CrMoSiN coatings with various Mo contents in artificial seawater

Influence of Molybdenum Content and Load on the Tribological Behaviors of In-Situ Cr3C2-20 Wt % Ni Composites

Corrosion and mechanical behavior of amorphous-nanocrystalline NiCrMo coatings

Effects of Molybdenum on the Microstructure and Wear Resistance of Nickel-Based Hardfacing Alloys Investigated Using Rietveld Method

The effect of molybdenum content on microstructure, mechanical, tribological and corrosion behavior of Zr-Mo-N composite films

Enhancing the adhesion strength and wear resistance of nanostructured NiCrN coatings

Structure and tribocorrosion behavior of CrMoSiCN nanocomposite coating with low C content in artificial seawater

Study on Wear and Friction Resistance of CrTiAlMoN Coatings Deposited by Magnetron Sputtering

Effect of Mo on microstructure and sliding wear performance of CoCrFeNiMox high entropy alloy coatings by laser cladding

Comparison in Mechanical and Tribological Properties of Cr–W–N and Cr–Mo–N Multilayer Films Deposited by DC Reactive Magnetron Sputtering

Structure and Wear Behavior of AlCrSiN-based Coatings

Influence of Cr on the Surface Properties of the Micro-Textured WC+Co Alloy Coating

Effect of Substrate on Microstructure and Tribological Properties of AlCrN Hard Coating

Tribological and electrochemical behaviors of FeCoNiCrMox HEA coatings prepared by internal laser cladding on 316L steel tube

Microstructure, Adhesion and Tribological Properties of CrN/CrTiAlSiN/WCrTiAlN Multilayer Coatings Deposited on Nitrocarburized AISI 4140 Steel

Preparation and Properties of Mo Coating on H13 Steel by Electro Spark Deposition Process

Effect of Stellite12 and NiCrBSi HVOF coatings on the tribological behavior of CrN PVD film

Effect of Mo on the high-temperature oxidation behavior of Cr-Ni-Mo Hot-Work Die Steels

Microstructure Evolution and Enhanced Wear Resistance of Al2CrFeNiMo High Entropy Alloy Coating Fabricated by Laser Cladding

Microstructure and water-lubricated friction and wear properties of CrN(C) coatings with different carbon contents