Abstract:Aiming at the difficulties of load transfer without power interruption between two distribution lines with 30°phase angle difference which are existed in a fair amount in present power system in China,a scheme of fast closing and opening loop is proposed to shorten the duration of loop current,and the sequence control of pro-assigned circuit breaker group is proposed to copy with the possible refusing action of circuit breaker.Taking the real network as case study,firstly,the loop current characteristics under the fault and normal condition are analyzed.The electrodynamic force can be ignored if the corresponding power system is not working in its maximum operation mode.Secondly,the allowable loop current time duration of main electrical equipment to bear the thermal effect is estimated as well as the maximum duration of over limit loop current considering fault scenarios without affecting relay protection.And the minimum loop current time duration will be selected as the maximum operation time window for sequence control of pre-assigned circuit breaker group.Thirdly,it is revealed that the minimum loop current can be obtained under the coordinated selection between angle of voltage on two sides of the closing circuit breaker and the time interval of closing-opening of pre-assigned circuit breaker group.Finally,the overvoltage effect due to the loop closing-opening operation has been studied.The whole studies provide a calculation support for the proposed scheme of high-speed and sequence control automatic loop closing-opening to finish the load transfer without interruption operation,and it is proved by the pilot real applications.

Calculation of the Loop Closing Steady-state Current in Distribution Network by Considering the Branch Load Distribution

A Passive Calculation Method for Loop-Closing Current in Distribution Networks Based on Thevenin Theorem

Calculation Method of the Equivalent Impedance of a Distribution Network Based on Power Loss

Research on Hangzhou 10 Kv Distribution Network Closing Loop Operation

A General Load Flow Method for Distribution Systems Based on Improved Loop-Current Method

Loop Closing Examination and Analysis on Beijing 10 Kv Distribution Network

A General Fast Power Flow Algorithm for Transmission and Distribution Networks

Distribution Network Reconfiguration Method Considering Loop Closing Constraints

Research on real-time power flow calculation method in closed-loop distribution networks

An Improved Loop Current Analysis Suitable to Power Flow Calculation of Distribution Network

Power Flow Calculating Algorithm Based on Loop Current Analysis

Calculation and graphical display of surge current due to closing loop based on dispatching and distribution integration loop automatic search and automatic layout drawing

Calculation Method for Determining the Closest Load Boundary in Power System

An Efficient Sparse Matrix Technique for Closed Loop Current Analysis in Distribution Network

The Feasibility Research on Distribution Network Loop Closing Operation Based on Hybrid Grounding Model of Arc Suppression Coil and Low Resistance

Security loop closing technology for active distribution network based on synchronous phasor measurement

A ZBUS POWER FLOW CALCULATION METHOD FOR DISTRIBUTION NETWORK BASED ON NEWTON METHOD

Solution and Its Key Issue Analysis for Load Transfer Without Power Interruption of Distribution Lines with 30°Phase Angle Difference

Security Analysis of Distribution Network Loop Closure Based on Half Invariant Method

Loop Type Conversion and Regulation of Line Flow Violation Based on Loop Analysis

The Hybrid Analysis Method Based on Current and Nodal Voltage in Power Network