Abstract:The effects of thermal oxidation on the molecular and macromolecular structures of additive free PE were investigated between 100 °C and 140 °C in air in order to tentatively establish non-empirical structure/property relationships. In the first part, the changes in POOH concentration were assessed by three different analytical methods: iodometry, modulated differential scanning calorimetry, and Fourier transform infrared (FTIR) spectrophotometry after SO2 treatment. All these methods provided very similar results until the end of the induction period, after which iodometry overestimated strongly POOH concentration because it titrates also other chemical species formed at high conversion ratios, namely double bonds. In parallel, the changes in carbonyl group concentration were determined by FTIR spectrophotometry after NH3 treatment. As the accumulation kinetics of ketones, aldehydes, and carboxylic acids were closely interrelated, the question of their actual formation mechanisms in the current thermal oxidation mechanistic scheme was raised. An alternative reaction pathway was proposed for the bimolecular decomposition of POOH. In the second part, the corresponding changes in weight and number average molecular masses were monitored by high temperature gel permeation chromatography equipped with a triple detection technology. As both quantities decreased dramatically from the beginning of exposure and their ratio Mw/Mn tends toward the asymptotic value of 2 and it was concluded that a “pure” chain scission process operated. Finally, as the number of chain scissions perfectly correlates, the concentration sum of aldehydes and their oxidation products (i.e., carboxylic acids), it was also concluded that these carbonyl groups result exclusively from the β scission of alkoxy radicals. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43287.

Existing research situation on thermo-oxidative degradation and stabilization of polyamide hot melt adhesive

Study on stabilization of polyamide hot melt adhesive

Study on Melt-Grafting of Maleic Anhydride Onto Polypropylene in the Presence of Styrene

Preparation of a Novel Stabilizer and Its Thermal‐oxidative Stabilization Effect on Polyamide 6

Investigation on thermo-stabilization effect and nonisothermal degradation kinetics of the new compound additives on polyoxymethylene

Studies on the influence of soft-segment structure on the properties of polyurethane adhesive

STUDY ON THE THERMOSTABILIZATION OF POLYACETAL

High-temperature thermal oxidation of composites based on isotactic polypropylene with aliphatic polyamide 6/66

Synthesis and thermal degradation mechanism of a semi-aromatic copolyamide from renewable sources

Effect of Thermal Oxidative Aging on the Crystallization Behavior and Properties of Nylon-6

Thermal–oxidative Degradation and Accelerated Aging Behavior of Polyamide 6/epoxy Resin‐modified Montmorillonite Nanocomposites

Polyurethane Detachable Lamination Adhesives Containing Alkaline Degradable Aromatic Chain Extender

Study on Preparation and Performance of Reactive Polyurethane Hot Melt Adhesives Based on a Polycarbonate Diol and a Polyester Diol

Study on Properties and Preparation of Thermoplastic Polyurethane Hot-Melt Adhesive

An Investigation Of Cure And Thermal Stability Of Poly(Amide-Amidic Acid) Modified Tetraglycidyl 4,4-Diaminodiphenylmethane/4,4-Diaminodiphenylsulfone

Effect of addition of 1,6-hexanediamine on thermal properties and crystallization behaviors of biobased PA10T polyamides

Synthesis and application of new macromolecular hindered phenol antioxidants of polyamide 6

Synthesis and characterization of low-temperature polyamide 6 (PA6) copolyamides used as hot melt adhesives and derived from the comonomer of novel aliphatic diamine bis(2-aminoethyl) adipamide and adipic acid

Recycling and Degradation of Polyamides

Thermo‐oxidative degradation of additive free polyethylene. Part I. Analysis of chemical modifications at molecular and macromolecular scales