Abstract:A comparative experiment to determine the effect of tiny mass eccentricity in 12.7mm spin-stabilized projectiles on the position of the impact points.An artificial intelligence algorithm, Adaptive Neuro-Fuzzy Inference Systems (ANFIS), was applied to model the shooting process of the weapon system in this work.This study used Sobol's algorithm for analyzing models to calculate their global sensitivity indices and determine the four most influential factors. This will enable engineers to adjust outputs toward expected values by fine-tuning influential parameters.This study investigates and quantifies some possible sources affecting the position of impact points of small caliber spin-stabilized projectiles (such as 12.7mm bullets). A comparative experiment utilizing the control variable method was designed to figure out the influence of tiny eccentric centroids on the projectiles. The study critically analyzes data obtained from characteristic parameter measurements and precision trials. It also combines Sobol's algorithm with an artificial intelligence algorithm—Adaptive Neuro-Fuzzy Inference Systems (ANFIS) – in order to conduct global sensitivity analysis and determine which parameters were most influential. The results indicate that the impact points of projectiles with an entry angle of 0° deflected to the left to that of projectiles with an entry angle of 90°. The difference of the mean coordinates of impact points was about 12.61cm at a target range of 200m. Variance analysis indicated that the entry angle – i.e. the initial position of mass eccentricity – had a notable influence. After global sensitivity analysis, the significance of the effect of mass eccentricity was confirmed again and the most influential factors were determined to be the axial moment and transverse moment of inertia (<math>Izz</math>,<math>Iyy</math>), the mass of a projectile (<math>m</math>), the distance between nose and center of mass along the symmetry axis for a projectile (<math>Lm</math>), and the eccentric distance of the centroid (<math>Lr</math>). The results imply that the control scheme by means of modifying mass center (moving mass or mass eccentricity) is promising for designing small-caliber spin-stabilized projectiles.

A New Method of Ballistic Correction by Controlling the Nose Angle of Rocket

A New Boresighting Method of the Aircraft Gun Using a Laser Tracker

Numerical Solution of the Aerodynamic Properties of the Rotating Projectiles

The Design and Aerodynamic Characteristics Analysis on Resistance-increasing One-dimensional Trajectory Correction Mechanism

Impulse Correction Technology for Terminal Correction Rocket

Design of New One-dimensional Trajectory Correction Mechanism

Accuracy Analysis for Digital Boresighting of Aircraft Gun

Study on the Precision of a Terminal Correction Rocket

Research on Angular Motion Characteristics and Stability of Trajectory-Corrected Rocket Projectile with Isolated Rotating Tail Rudder

Variable-structure trajectory correction control of small-caliber ammunition based on cascade fuzzy active disturbance rejection

Research on Correction Ability for Simple Guided Artillery Rocket’s Fixed Canard Rudder

Method of Ballistic Control and Projectile Rotation in a Novel Railgun

Vibration reduction performance of an arc tripod structure for firing accuracy improvement

An experiment evaluating how the tiny mass eccentricities in spin-stabilized projectiles affect the position of impact points

Application of High Kinetic Energy Buffer Control Technology after Free Recoil

Monte-Carlo Based Lateral Thruster Parameters Optimization for 122 mm Rocket

Kinematics Simulation And Experimental Verification Of Rotational-Yaw Mechanism Under Impulsive Force

Dispersion Internal Ballistic Model of the Rocket-borne Vehicle

Study on the control projects of long range tactical rocket

Numerical simulation and optimized design of a launching system with a novel charge structure

Research on Strategy to Decrease Wind Load of Solid Rocket with Multiple-Stage Boosters