Abstract:Studying the thermal damage constitutive model of rock using statistical theory can better reflect the damage evolution process and the stress–strain relationship of rock under temperature and loading, which is one of the key problems especially in deep rock mechanics. The thermal-mechanical coupling damage constitutive model of rock is established using the Hoek–Brown strength criterion, based on the Weibull distribution and the continuous damage theory. The rationality of the model is also verified by experiments. The main conclusions are as follows. The stress–strain curves of rock can be divided into four stages according to the damage evolution characteristics, including the non-damage of loading, damage stability expansion, damage intensification expansion, and damage stability expansion to saturation, and the method of determining the demarcation points of each stage is given clearly. The initial damage point of the rock is about 25% of the peak stress, the damage value is about 0.3 when the rock reaches the peak stress and about 0.6 when reaches the residual stress. Both the damage value and the strain energy release rate of the rock corresponding to the peak stress show exponential growth with the increase in confining pressure. The maximum damage evolution rate of the rock shows exponential decay as the confining pressure rises, indicating that the confining pressure can delay the development of cumulative damage. The modified damage constitutive model considering compaction coefficient is in good agreement with the test curves in the stage of compaction, linear elasticity, yield, and pre-peak strength. It is hoped that through the research of this paper, it can provide references for studying the macroscopic mechanical response from the damage propagation characteristics of the rock in the future.

Investigation on coupled thermo-hydro-mechanical-damage(THMD) model for rock failure process

Study on Coupled Thermal-Mechanical-damage Model in Rock Failure Process

Coupled Thermal-Hydraulic-mechanical Model During Rock Damage and Its Preliminary Application

A Coupled Thermo-Hydrologic-Mechanical Damage Model and Associated Application in A Stability Analysis on A Rock Pillar

Investigation of thermal-hydro-mechanical coupled fracture propagation considering rock damage

Thermal-hydro-mechanical Coupling Damage Model of Brittle Rock

A fully coupled thermo-hydro-mechanical elastoplastic damage model for fractured rock

Thermo-hydro-mechanical-damage Coupling Model of Quasi-Brittle Material

MESO-STRUCTURE CHARACTERIZATION BASED ON COUPLED THERMAL-MECHANICAL MODEL FOR ROCK FAILURE PROCESS AND APPLICATIONS

A Coupled Hydraulic-Mechanical-damage Geotechnical Model for Simulation of Fracture Propagation in Geological Media During Hydraulic Fracturing

A Coupled Thermal–Hydrological–Mechanical Damage Model and Its Numerical Simulations of Damage Evolution in APSE

TOUGH-RFPA: Coupled Thermal-Hydraulic-mechanical Rock Failure Process Analysis with Application to Deep Geothermal Wells

Load-bearing characteristics of surrounding rock of hydraulic tunnels under high temperature and hydraulic pressure conditions using coupled thermo-hydro-mechanical-damage numerical model

FE Analysis of Rock with Hydraulic-Mechanical Coupling Based on Continuum Damage Evolution

Three-Dimensional Numerical Investigation of Coupled Flow-Stress-Damage Failure Process in Heterogeneous Poroelastic Rocks

Damage constitutive model and mechanical properties of jointed rock mass under hydro-mechanical coupling

Thermo-mechanical coupling damage constitutive model of rock based on the Hoek–Brown strength criterion

Numerical Simulation and Analysis of Damage Evolution and Fracture Activation in Enhanced Tight Oil Recovery Using a THMD Coupled Model

A three-dimensional thermal-hydro-mechanical coupling model for simulation of fracturing driven by multiphysics

Modeling Progressive Damage and Failure of Rock under Continuous Cyclic Loading Considering Strength Degradation of Mesoscopic Finite Elements

A New Thermo-Mechanical Coupled DEM Model with Non-Spherical Grains for Thermally Induced Damage of Rocks