Thermohydraulic analysis of hybrid smooth and spirally corrugated tubes
Chen Yang,Gan Liu,Junhui Zhang,Jin-yuan Qian
DOI: https://doi.org/10.1016/j.ijthermalsci.2020.106520
IF: 4.779
2020-01-01
International Journal of Thermal Sciences
Abstract:A novel hybrid smooth and spirally corrugated tube is introduced in this article, which is the combination of smooth part and corrugated part. With the help of the finite volume method, a better understanding of the mechanism for heat transfer enhancement can be obtained. A qualitative and quantitative analysis about the effect of geometrical parameters on heat transfer, pressure loss and Performance Evaluation Criteria (PEC) is given, with pitch ratio p/D ranging from 3.50 to 4.50, and corrugation depth ratio e/D from the range of 0.09-0.22 at Reynolds numbers of 10,000-35,000. The results of heat transfer coefficient and turbulent kinetic energy confirm the superiority of the case with p/D = 3.75 in heat transfer enhancement, while the maximum augmentation is found to be 258%. To evaluate the pressure loss of the hybrid smooth and spirally corrugated tube, the friction factor ratio is calculated with the comparison of smooth tube. Results show that tube of the case with p/D = 4.5 generates less pressure loss, which is 1%-8% larger than smooth tube. As an indication for the comprehensive performance under the same pumping power, the highest value of PEC index is achieved by the case with p/D = 4.5, which is about 1.10 times that of the lowest value. With the corrugation depth ratio e/D = 0.09, the hybrid smooth and spirally corrugated tube has better thermal and hydraulic performance.