Abstract:In recent years, the construction of a CFST arch bridge has developed rapidly; however, as a kind of structural system dominated by compression, with the increase of material strength and span, the stability of the main arch of the CFST arch bridge has become more and more important. In this paper, the finite element method is used to analyze the hanger force and the main arch stability of the long-span CFST arch bridge. Combined with the Shenzhen Rainbow Bridge project, the axial force of the hanger, the internal force, and stability of the main arch of the arch bridge are studied. In the establishment of the finite element model, considering the actual operation of the arch bridge, the model simulates the interaction between steel pipe and concrete, it studies the large deformation of CFST arch bridges, and the stress distribution and overall stability of the arch bridge are analyzed. The results show that the main deformation of the CFST arch bridge is the vertical displacement of the deck, and the axial force of most members of the upper arch ribs is greater than that of the lower arch ribs. The axial force and bending moment of the lower arch rib near the arch foot are larger, and the compressive stress of the arch foot is greater than that of other positions. The axial force of the suspender of the arch bridge is the largest at both ends of the hanger and the middle hanger, and the axial force of the other hanger is close to each other, and the axial force changes little under the same case. The buckling modes of the arch are mainly the lateral buckling or flexural buckling of the arch rib outside the plane, which indicates that the vertical stiffness of the arch bridge structure is larger than that of the transverse stiffness. The research results make the load-bearing mechanism of the CFST arch bridge more clear and also provide a certain reference for the design and construction of the CFST arch bridge.

Research on Effect of the Rigidity of Transverse Beams on the Behavior of Separated Two-box Combined Wide Bridge with Continuous Beam and Arch

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

The anti-arch inhibition effect of multispan continuous girder bridge strengthened with prestressed CFRP plates

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Impact Factor Characteristics Of Double Parabolic Arch Ribs In A Cfst Arch Bridge Due To Vehicle Loads

Damage Characteristics of Thin-Walled Steel Arch Bridges Subjected to In-Plane Earthquake Action

Study on Space Stress Characteristic and Carrying Capacity of Butterfly Arch

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

Analysis of the Transverse Connection Members of R.C.Rigid-frame Arch Bridge

Optimum Design of Large Span Concrete Filled Steel Tubular Arch Bridge Based on Static, Stability and Modal Analysis

Influence of Substructure Stiffness on Static Performance of Arch-beam Composite Bridge

Research on Hanger Force and Main Arch Stability of Long-Span Concrete-Filled Steel Tube Arch Bridge

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Reinforced Concrete Multi-Rib Arch Bridge Strengthened by Changing Structural System

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Study of impact factor of arch bridge made with continuous composite concrete filled steel tube beams