Abstract:NiCoCrAlTaY coating is widely used in high temperature oxidation resistance, gas erosion protection and gas path sealing of hot-end parts of aeroengines and gas turbines. In this study, NiCoCrAlTaY coatings were prepared on cobalt-based superalloy substrates by high pressure cold spray technology. The microstructure, mechanical property and tribological behaviors of the coatings before and after thermal exposure at 1050 °C were systemically studied. The results showed that NiCoCrAlTaY coatings with very dense structure could be obtained by high-pressure cold spraying with nitrogen as carrier gas. The coating remained completely intimate with the substrate without any cracking and spalling after thermal exposure at 1050 °C for 500 h. Due to elemental diffusion at high temperatures, the coating formed a four-layer structure, including alumina film on the surface, β-NiAl phase depletion layer near the surface, intermediate layer containing β-NiAl phase and β-NiAl phase depletion layer near the substrate. With the prolongation of thermal exposure at 1050 °C, the thicknesses of β-NiAl phase depletion layers both near the surface and the substrate increased. The thickness and content of the intermediate β-NiAl phase layer decreased gradually during thermal exposure. Besides, the average hardness values of the coating rapidly decreased by about 30 % after thermal exposure at 1050 °C for 5 h. In particular, the hardness of the β-NiAl phase depletion layer near the surface substrate was lower than that of the intermediate area containing β-NiAl phase. Due to the microstructure and hardness evolution, the wear resistance of the coating decreased significantly after thermal exposure. The friction coefficient of the coating increased from 0.2 to 0.5, and the volume wear rate of the thermally exposed coating was about 4.5 times higher than that of the as-sprayed coating. The results of this study provide guidance for design and application of high-performance MCrAlY coatings.

Study on High-temperature Erosion Resistance of NiCoCrAlY/ZrO2 Thermal Barrier Coating

Effect of Nitrogen Protective Atmosphere on Microstructure and High Temperature Erosion Property of TiAl3 and Cr3C2 Composite Coatings

Effect of high temperature exposure on microstructure, mechanical and tribological properties of cold sprayed NiCoCrAlTaY coatings

High Temperature Erosion Properties of Arc-Sprayed Coatings Using Various Cored Wires Containing Ti–Al Intermetallics

Preparation and Properties of Thermal Barrier Coating with Nanometer Alumina Coated Zirconia

Preparation of NiTi-Cr3C2/Nano-TiC Coating and Its Properties

A novel plasma-sprayed Cr/FeCrAl dual-layer coating on Zr alloy for potential high‐temperature applications

High-Temperature Oxidation And Tensile Behaviors Of Cral Coating On Zirconium Alloy

The high-temperature oxidation and mechanical properties of the Cr/Zr and CrN/Zr coating

Microstructure and properties of Al2O3-ZrO2-Y2O3 coatings during high temperature and thermal shock resistance

A study on the thermal cyclic behavior of NiCrAlY coatings via femtosecond laser remelting with high repetition rate

A Study Of Nico0.6fe0.2crxsialtiy High-Entropy Alloys For Applications As A High-Temperature Protective Coating And A Bond Coat In Thermal Barrier Coating Systems

Erosion Resistance Of Ni-Wc Self-Fluxing Alloy Coating At High Temperature

Hydrophobicity of Cr3C2-NiCr coating under mechanical abrasion and thermal annealing

Formation of high heat resistant coatings by using gas tunnel type plasma spraying

A Study of NiCo<sub>0.6</sub>Fe<sub>0.2</sub>Cr<sub>x</sub>SiAlTi<sub>y</sub>High-Entropy Alloys for Applications as a High-Temperature Protective Coating and a Bond Coat in Thermal Barrier Coating Systems

Isothermal oxidation behavior of NiCoCrAlY/ZrO2 composite coating on γ-TiAl alloy

Microstructure and Properties of Sputtered Thermal Barrier Coatings

Thermal shock resistance of Cr/CrN/Cr/CrAlN multilayer anti-erosion coating

Investigation on the Oxidation Behavior of the NiCrAlY Bond-Coat with Low Al Content Sprayed by High Velocity Oxygen Fuel Method

Characterization of vacuum plasma spray NiCoCrAlY coating resistant to high temperature oxidation