Abstract:The present work aims to examine the reciprocating wear characteristics at elevated temperatures (200 °C, 400 °C, and 600 °C) of CoCrFeNiW 0.3 + 5 at% C high entropy alloy coatings, which has been synthesized by atmospheric plasma spraying. The experimental findings pertaining to the worn surface demonstrate that an increase in testing temperature leads to a reduction in wear scar depth. The findings derived from the examination using field emission scanning electron microscopy (FESEM) revealed the existence of wear debris, an adhesive layer, craters, and scratches on the surfaces that were subjected to wear. The examination of worn surfaces using X-ray photoelectron spectroscopy (XPS) has shown the existence of several oxides. The presence of oxides is established while evaluating worn surfaces by Fourier transform infrared spectroscopy (FTIR). The X-ray diffraction (XRD) analysis reveals that the lack of oxide development might perhaps be attributed to the limited width of the worn track. The observed reduction in wear volume loss with increasing testing temperature may be attributable to the reaction arise inside the tribolayer and oxides formation. The energy-dispersive X-ray spectroscopy (EDS) examination of the Al 2 O 3 counter body indicated the presence of a transferred tribofilm. The alloy coating, namely the CoCrFeNiW 0.3 + 5 at% C alloy coating, exhibits a decreased mass loss of 9.43 mg and an average coefficient of friction of 0.46 at a test temperature of 600 °C. When the sample is subjected to a wear testing temperature of 600 °C, the wear mass is decreased by 24.37%. The results of this investigation provide promising prospects for practical use in applications requiring high temperature wear resistance.

A Study of NiCo<sub>0.6</sub>Fe<sub>0.2</sub>Cr<sub>x</sub>SiAlTi<sub>y</sub>High-Entropy Alloys for Applications as a High-Temperature Protective Coating and a Bond Coat in Thermal Barrier Coating Systems

A Study Of Nico0.6fe0.2crxsialtiy High-Entropy Alloys For Applications As A High-Temperature Protective Coating And A Bond Coat In Thermal Barrier Coating Systems

Effect of Submicron SiC Particles on the Properties of Alcocrfeni High Entropy Alloy Coatings

A Heat-Resistant Nico0.6fe0.2cr1.5sialti0.2 Overlay Coating for High-Temperature Applications

Thermal Sprayed High-Entropy NiCo 0.6 Fe 0.2 Cr 1.5 SiAlTi 0.2 Coating with Improved Mechanical Properties and Oxidation Resistance

Microstructure evolution and properties of Fe-Ni-Cr-Co-Mo-W high-entropy alloy coatings by plasma surface alloying technology

Assessment of CrFeCoNi and AlCrFeCoNi High-Entropy Alloys as Bond Coats for Thermal Barrier Coatings

On the Study of Thermal-Sprayed Ni0.2Co0.6Fe0.2CrSi0.2AlTi0.2 HEA Overlay Coating

High temperature tribological behavior of atmospheric plasma-sprayed CoCrFeNiW0.3 + 5 at% C high-entropy alloy coating

High Temperature Oxidation Resistance of NiCoCrAl High Entropy Alloy Coating on the TiAl Alloy

Initial Oxidation Behavior of AlCoCrFeNi High-Entropy Coating Produced by Atmospheric Plasma Spraying in the Range of 650 °C to 1000 °C

High-temperature oxidation and diffusion studies on selected Al–Cr–Fe–Ni high-entropy alloys for potential application in thermal barrier coatings

Evaluation of New High Entropy Alloy as Thermal Sprayed Bondcoat in Thermal Barrier Coatings

Oxidation Behavior of FeNiCoCrMo0.5Al1.3 High-Entropy Alloy Powder

Elevated-temperature wear behavior and mechanisms of APS-sprayed Al 0.6 TiCrFeCoNi high entropy alloy coating

Application of plasma-sprayed Al x CrCoFeNi High-Entropy alloys for high-temperature oxidation resistance

High-Temperature Wear Behavior and Mechanisms of Self-Healing NiCrAlY-Cr3C2-Ti2SnC Coating Prepared by Atmospheric Plasma Spraying

CoCrFeMnNi0.8V/Cr3C2-Ni20Cr High-Entropy Alloy Composite Thermal Spray Coating: Comparison with Monolithic CoCrFeMnNi0.8V and Cr3C2-Ni20Cr Coatings

Novel candidate of metal-based thermal barrier coatings: High-entropy alloy

NiCoCrAlX (X = Y, Hf and Si) Bond Coats by Cold Spray for High Temperature Applications

Microstructural evolution and high temperature hot corrosion behaviour of AlCoCrFeNiTi high-entropy alloy coatings