Abstract:Improving the thickness of superconducting layer in coated conductors is an effective way to enhance its critical current. In this work, tri-layer YBCO/YBCO/YDyBCO films were successfully deposited on buffered Hastelloy substrate using the multi-coating lowfluorine metal-organic decomposition (LF-MOD) method and the thickness of the films can be up to 2.4 mu m. The effects of high-temperature annealing time on microstructures and superconducting properties of the films were systematically studied. Energy dispersive X-ray spectroscopy (EDS) results reveal that there remains a large amount of F element in the upper layer of the film when the annealing time is too short. With increasing the annealing time, the fluoride-containing precursor converts to YBCO grains completely. But the coarsening of grains appeared, and the critical current density (J (c)) of the film dropped slightly when the annealing time is too long. The cross-sectional scanning electron microscope (SEM) image and EDS plane analysis were applied to investigate the microstructure and element distribution of the final triple-layer YBCO films, respectively. The critical current of the final YBCO superconducting film could reach 316 A (77 k, self-field) for 1.2-cm-wide tapes with the optimal annealing conditions.

Fabrication of Large Area Superconducting Thin Film by Pulsed Laser Scanning

Preparation of Yba2cu3o7-X Superconducting Thin-Films over Large Area Substrates

Deposition of Large-Area Yba2cu3o7 Superconducting Films by Laser-Scanning Ablation

Preparation of Superconducting Yba2cu3o7-X Films on Metallic Substrates by Pulsed Laser Deposition

Pulsed Laser Deposition of Thin YBCO Films on Faceted YSZ Single Crystal Fibers

YBCO Superconducting Thin Film Preparation on Metallic Substrates by Laser

Preparation and Critical-Current Measurements of Laser-Ablated Ybco Superconducting Thin-Films

Preparation of a YBCO Superconducting Tape by Pulsed Laser Deposition

Insitu Fabrication Of Ybco/Ysz/Si Thin-Films By Laser Ablation

Preparation of high crystalline YBCO superconducting thin films by PLD

In situ laser preparation of high Tc superconducting thin films at 450–550°C

Studies of high temperature superconducting thin films by transmission electron microscopy

Laser Scanning in Situ Deposition of Large Area YBa 2 Cu 3 O 7-X Superconducting Films

Fabrication And Analysis Of Tri-Layer Yba2cu3 O (7-Delta) Thick Films By Low-Fluorine Mod Method

Fabrication of YBCO/YSZ and YBCO/MgO Thick Films Using Electrophoretic Deposition with Top-Seeded Melt Growth Process

Insitu Laser Preparation of High-Tc Superconducting Thin-Film at 450-550-Degrees-c

Deposition of a high current density YBCO thick film on NiCr alloy substrate tape by pulsed laser

High Quality Superconducting Thin Films by Sputtering

STUDY OF THE PREPARATION OF HIGH Tc SUPERCONDUCTING YBCO THIN FILMS BY A PLASMA-ASSISTED MOCVD PROCESS

GROWTH AND PROPERTIES OF YBCO SUPERCONDUCTING THIN FILMS PREPARED BY DC MAGNETRON SPUTTERING FROM A PAIR OF SUPERCONDUCTING STOICHIOMETRIC YBCO TARGETS

Fabrication and Analysis of Tri-layer YBa 2 Cu 3 O 7− δ Thick Films by Low-Fluorine MOD Method