Abstract:A pair of SAR images acquired from different positions can be used to generate digital elevation model (DEM). Two techniques exploiting this characteristic have been introduced: stereo SAR and interferometric SAR. They permit to recover the third dimension (topography) and, at the same time, to identify the absolute position (geolocation) of pixels included in the imaged area, thus allowing the generation of DEMs. In this paper, StereoSAR and InSAR combined adjustment model are constructed, and unify DEM extraction from InSAR and StereoSAR into the same coordinate system, and then improve three dimensional positioning accuracy of the target. We assume that there are four images 1, 2, 3 and 4. One pair of SAR images 1,2 meet the required conditions for InSAR technology, while the other pair of SAR images 3,4 can form stereo image pairs. The phase model is based on InSAR rigorous imaging geometric model. The master image 1 and the slave image 2 will be used in InSAR processing, but the slave image 2 is only used in the course of establishment, and the pixels of the slave image 2 are relevant to the corresponding pixels of the master image 1 through image coregistration coefficient, and it calculates the corresponding phase. It doesn't require the slave image in the construction of the phase model. In Range-Doppler (RD) model, the range equation and Doppler equation are a function of target geolocation, while in the phase equation, the phase is also a function of target geolocation. We exploit combined adjustment model to deviation of target geolocation, thus the problem of target solution is changed to solve three unkonwns through seven equations. The model was tested for DEM extraction under spaceborne InSAR and StereoSAR data and compared with InSAR and StereoSAR methods respectively. The results showed that the model delivered a better performance on experimental imagery and can be used for DEM extraction applications.

Multichannel InSAR DEM Reconstruction Through Improved Closed-Form Robust Chinese Remainder Theorem

An Elevation Reconstruction Method Of Multi-Channel Insar Based On Optimal Estimation Of Common Remainder

Improved Multichannel InSAR Height Reconstruction Method Based on Maximum Likelihood Estimation

Multichannel DEM Reconstruction Method Based on Markov Random Fields for Bistatic SAR

The Facilitation of SRTM DEM-derived Interferogram to Accurate DEM Reconstruction

A New DEM Reconstruction Method Based on an Accurate Flattening Algorithm in Interferometric SAR

Digital Elevation Model Reconstruction in Multichannel Spaceborne/Stationary SAR Interferometry

Sar clinometry-and interferometry-derived dem reconstruction

A Multi-Baseline Algorithm with Sparsely-Distributed Permanent Scatterers to Unwrap InSAR Phase in Rugged Terrain.

Using Range Split-Spectrum Interferometry to Reduce Phase Unwrapping Errors for InSAR-Derived DEM in Large Gradient Region

Estimation of Residual Motion Errors and Phase Ambiguity for Repeat-Pass In-CSAR Without External DEMs

Error Analysis and 3D Reconstruction Using Airborne Array InSAR Images

Combined DEM Extration Method from StereoSAR and InSAR

Elevation reconstruction combining sar intensity and interferometric phase data

An Improved Multi-Baseline Phase Unwrapping Method for GB-InSAR.

Reconstruction Of Insar Dem Facilitated By Orbit Data And Srtm Data

Multi-Pass SAR Interferometry for 3D Reconstruction of Complex Mountainous Areas Based on Robust Low Rank Tensor Decomposition.

An Extended PUMA Algorithm for Multibaseline InSAR DEM Reconstruction

Three Dimensional Surface Reconstruction with Multistatic SAR.

Digital elevation model generation using multibaseline advanced land observing satellite/phased array type L-band synthetic aperture radar imagery

Robust Object-Based Multipass InSAR Deformation Reconstruction