Abstract:Five-axis machine tools are widely used in aerospace, die and mold industries. Most of the time, the tool path is described by connecting a series of short linear segments. The tangency discontinuity of the linear segments leads to the discontinuity of the kinematic profiles, hence generating discontinuous interpolation points, and resulting in fluctuation of machine motion, which reduces the machining efficiency and causes excessive tracking and contouring errors. This paper aims to generate smooth interpolation points at servo sample intervals with the proposed G 2 continuous five-axis corner rounding algorithm suitable for reducing feedrate fluctuation along the smoothed toolpath and improving machining efficiency, and the modified jerk-limited feedrate planning algorithm suitable for eliminating feedrate fluctuation within the feedrate planning units and improving interpolation computation efficiency. In this paper, the five-axis linear segments are first smoothed by curvature-optimized cubic Bezier splines, which reduces the number of the feedrate planning units along the smoothed toolpath and improves machining efficiency. Then, the jerk-limited feedrate planning algorithm is modified to ensure that the time interval of each different scheduled feedrate phase is an integer multiple of the axis position control loop closure time (i.e. servo sample interval), which eliminates the feedrate fluctuation within each feedrate planning unit and reduces the interpolation computation load of position command in each interpolation period (i.e. servo sample interval). At last, the effectiveness of the proposed algorithm is demonstrated with simulations and experiments following a five-axis, curved tool path on a CNC (Computer Numerical Control) machine tool.

A Simplified Realization Methodology of Trapezium AC/DE in 5-Axis Open CNC System

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Acceleration/deceleration control of CNC systems and velocity layout of end points in machining segments

Research on Cubic Polynomial Acceleration and Deceleration Control Model for High Speed NC Machining

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Research on a New S-curve Acceleration and Deceleration Control Method

Research On Feedrate Control Strategy For Sculptured Surfaces Machining With Five-Axis Cnc

An Applied CNC Acceleration and Deceleration Control Algorithm Research

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Curve interpolation control strategy for 5-axis linkage computer numerical control machine

An accurate surface error optimization for five-axis machining of freeform surfaces

Five-axis trajectory generation based on kinematic constraints and optimisation

An Interpolation Method for the Open CNC System Based on EPM

Spline Interpolation Controller with Fairing Function for Five-Axis Machining

Multi-axis motion control method of complex trajectory for high-speed machining

5-Axis Polynomial Spline Interpolation In An Open Cnc System

Integration of a 5-Axis Spline Interpolation Controller in an Open CNC System

Design And Research on Machining Orientation Control Based on Five Axis CNC Machine Tools

Development of Configurable Motion Controller with 5-Axis B-spline Interpolation Function

Study on Cutter Radius Compensation Methods for 5-Axis Cnc Machining

Smoothing interpolation of five-axis tool path with less feedrate fluctuation and higher computation efficiency