Abstract:A novel hydrogen peroxide (H2O2) sensor was fabricated by using a submonolayer of 3-mercaptopropionic acid (3-MPA) adsorbed on a polycrystalline gold electrode further reacted with poly(amidoamine) (PAMAM) dendrimer (generation 4.0) to obtain a film on which Prussian Blue (PB) was later coordinated to afford a mixed and stable electrocatalytic layer for H2O2 reduction. On the basis of the electrochemical behaviors, atomic force microscopy (AFM) and X-ray photoelectron spectra (XPS), it is suggested that the PB molecules are located within the dendritic structure of the surface attached PAMAM dendrimers. It was found that the PB/PAMAM/3-MPA/Au modified electrode showed an excellent electrocatalytic activity for H2O2 reduction. The effects of applied potential and pH of solution upon the response of the modified electrode were investigated for an optimum analytical performance. Even in the presence of dissolved oxygen, the sensor exhibited highly sensitive and rapid response to H2O2. The steady-state cathodic current responses of the modified electrode obtained at -0.20 V (vs. SCE) in air-saturated 0.1 mol L-1 phosphate buffer solution (PBS, pH 6.50) showed a linear relationship to H2O2 concentration ranging from 1.2 x 10(-6) mol L-1 to 6.5 X 10(-4) mol L-1 with a detection limit of 3.1 x 10(-7) mol L-1. Performance of the electrode was evaluated with respected to possible interferences such as ascorbic acid and uric acid etc. The selectivity, stability, and reproducibility of the modified electrode were satisfactory.

Hydrogen Peroxide Biosensor Modified By Prussian Blue And Derivative Of 3,4,9,10-Perylenetetracarboxylic Dianhydride

A Hydrogen Peroxide Sensor Prepared By Electropolymerization Of Pyrrole Based On Screen-Printed Carbon Paste Electrodes

Hydrogen Peroxide Biosensor Based on Prussian Blue and Gelatin Modified Electrode

Hydrogen Peroxide Biosensor Based On Toluidine Blue And Nano-Au Through Electrostatic Adsorption

Screen Printed Biosensor for Hydrogen Peroxide Based on Prussian Blue Modified Hydroxyapatite

Hydrogen Peroxide Sensor Based on Prussian Blue Electrodeposited on (3-Mercaptopropyl)-trimethoxysilane Polymer-Modified Gold Electrode

A Novel Hydrogen Peroxide Biosensor Based on the BPT/AuNPs/graphene/HRP Composite

Improvement of Selectivity and Stability of Amperometric Detection of Hydrogen Peroxide Using Prussian Blue‐PAMAM Supramolecular Complex Membrane As a Catalytic Layer

Amperometric hydrogen peroxide biosensor based on the immobilization of HRP on nano-Au/Thi/poly (p-aminobenzene sulfonic acid)-modified glassy carbon electrode.

A Hydrogen Peroxide Biosensor Based on Nano-Au/pamam Dendrimer/cystamine Modified Gold Electrode

A new hydrogen peroxide biosensor based on gold nanoelectrode ensembles/multiwalled carbon nanotubes/chitosan film-modified electrode

An Amperometric Hydrogen Peroxide Biosensor Based on Poly 2-Aminopyridine/ Nano-Au and Thionine Modified Pt Electrode

Amperometric Biosensor for Hydrogen Peroxide Based on Hemoglobin/DNA/Poly-2,6-pyridinediamine Modified Gold Electrode

A New Biosensor for Hydrogen Peroxide Based on Ag Colloid-Modified Electrode and Azure C Mediation

Dendritic Silver/Silicon Dioxide Nanocomposite Modified Electrodes for Electrochemical Sensing of Hydrogen Peroxide

A Hydrogen Peroxide Biosensor Based on Multiwalled Carbon Nanotubes-Polyvinyl Butyral Film Modified Electrode

Hydrogen Peroxide Biosensor Based on Azure I and Nano-Au Through Layer by Layer Electrostatic Adsorption

Hydrogen peroxide biosensor based on enzyme multilayers through electrostatic adsorption

Amperometric Biosensor for Hydrogen Peroxide Based on Electrodeposited Sub-micrometer Gold Modified Glassy Carbon Electrode

Amperometric Hydrogen Peroxide Biosensor Based on Horseradish Peroxidase-labeled Nano-Au Colloids Immobilized on Poly(2,6-pyridinedicarboxylic Acid) Layer by Cysteamine

Hydrogen peroxide biosensor based on gold nanoparticles/PDDA/ L-cysteine modified gold electrode