Abstract:Different types and amounts of steel fibers have varying effects on the improvement of concrete's mechanical properties. In order to identify the most suitable steel fiber types for the practical production of prefabricated pavements and derive a formula to predict and evaluate the mechanical properties based on steel fiber volume fraction, this study conducted experimental research on the physical mechanical properties of concrete using the method of equal volume substitution of coarse aggregate. The influence of steel fiber type and volume fraction on the microstructure and failure mechanism of steel fiber reinforced concrete (SFRC) was analyzed through electron microscopy scanning. The mechanical properties of plain concrete were used as benchmark. The results showed that when the steel fiber volume fractions were 0.6% and 1.5%, the bending and split tensile strengths of milled steel fibers were 3.1% higher than those of hooked-end steel fibers and the compressive strength of SFRC was significantly increased by 13.5%. The comprehensive mechanical properties of wave-shaped steel fibers were inferior to the first two types. Considering the requirements of SFRC in engineering, milled steel fibers are more suitable to be concrete components. This is because the tangling property of the hooked-end steel fibers makes them difficult to be shaped. In contrast, the smooth surface of milled steel fibers exerts a smaller impact on the forming of specimen and they are more economical. The mechanical properties of SFRC improve as the volume fraction of steel fibers increases from 0% to 2%, but start to decline when the volume fraction exceeds 2%. A volume fraction of 0.6% for steel fibers is sufficient to meet the standard for bending and tensile strength in heavy-duty concrete pavements. Finally, the relationship expressions between the compressive strength, flexural strength, and split tensile strength of SFRC and the steel fiber volume fraction were obtained through fitting the experimental data using Origin software.

Mechanical Properties Of Steel Fiber-Reinforced, High-Strength, Lightweight Concrete

Properties of High-Strength Steel Fiber-Reinforced Concrete Beams in Bending

Influence of Fiber Type on Mechanical Properties of Lightweight Cement-Based Composites

Experimental Study on Static and Dynamic Mechanical Properties of Steel Fiber Reinforced Lightweight Aggregate Concrete

Experimental study on mechanical properties of steel fiber reinforced concrete

Experimental Study on Mechanical Properties of Steel Fiber Reinforced Lightweight Aggregate Concrete

Mechanical Properties of Fiber Reinforced Self-Compacting Concrete

Mechanical Properties of Lightweight Aggregate Concrete Reinforced with Various Steel Fibers

The Effects of Steel Fiber Types and Volume Fraction on the Physical and Mechanical Properties of Concrete

Static and Dynamic Mechanical Behavior of High Performance Steel Fiber Reinforced Concrete Mixed with High Volume Fly Ash

The Influence of Steel Fiber Tensile Strengths and Aspect Ratios on the Fracture Properties of High-Strength Concrete

Flexural Toughness and Impact Resistance of Steel Fiber Reinforced High-Strength Lightweight Aggregate Concrete

Experimental Study on the Flexural Properties of Steel-Fibre-Reinforced Concrete Specimens with Different Heights

Influence of the Steel Fiber Length on the Properties of Lightweight Concrete

Mechanical Properties of Polymer Modified Concrete with Steel Fiber

Investigation of Flexural Strength of Steel Fiber Reinforced High Performance Concrete

Mechanical properties and corrosion resistance of high performance fiber-reinforced concrete with steel or amorphous alloy fibers

Tensile Performance Test Research of Hybrid Steel Fiber—Reinforced Self-Compacting Concrete

Experiment on Mechanical Properties of High-performance Concrete with Different Fibers

Influence of Fiber Type on Concrete Flexural Toughness

Mechanical Properties of Hybrid Fiber-Reinforced Concrete at Low Fiber Volume Fraction