Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Detection of H2S down to ppb levels at room temperature using sensors based on ZnO nanorods

ZnO Nanoparticle-Based MEMS Sensors for H2S Detection

ZnO Nanoparticle-Based MEMS Sensors for H 2 S Detection

Highly Sensitive Detection of H2s Gas at Low Temperature Based on Znco2o4 Microtube Sensors

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

The detection of H2S at room temperature by using individual indium oxide nanowire transistors

Preparation and Gas-Sensing Performances of ZnO/CuO Rough Nanotubular Arrays for Low-Working Temperature H2S Detection

Room-Temperature High-Performance H2S Sensor Based on Porous CuO Nanosheets Prepared by Hydrothermal Method.

The preparation of MOFs-derived ZnO/Co3O4 nanocages and its sensing performance to H2S

Sensitive Room-Temperature H2S Gas Sensors Employing SnO2 Quantum Wire/Reduced Graphene Oxide Nanocomposites

ZnO@CuO hollow nanospheres based composites used for sensitive detection of hydrogen sulfide with long-term stability

Fabrication of in-situ grown and Pt-decorated ZnO nanoclusters on new-type FTO electrode for room-temperature detection of low-concentration H2S

High-response H2S sensor based on ZnO/SnO2 heterogeneous nanospheres

In Operando Impedance Spectroscopic Analysis on NiO–WO3 Nanorod Heterojunction Random Networks for Room-Temperature H2S Detection

Room temperature ppb level H2S detection of a single Sb-doped SnO2 nanoribbon device

Room-temperature High-Sensitivity H2S Gas Sensor Based on Dendritic ZnO Nanostructures with Macroscale in Appearance

ZnO@CuO Hollow Nanosphere-Based Composites Used for the Sensitive Detection of Hydrogen Sulfide with Long-Term Stability

Solution-processed SnO2 nanowires for sensitive and fast-response H2S detection

Ultra-sensitive Room-Temperature H 2 S Sensor Using Ag–In 2 O 3 Nanorod Composites

ZnO-carbon Nanofibers for Stable, High Response, and Selective H2S Sensors.

Hydrothermally synthesized MXene Ti3C2/Zn2SnO4 based nanocomposite for H2S sensing at room temperature