Universal Solutions for Fiber-Reinforced Compressible Isotropic Elastic Materials

D. E. Beskos

DOI: https://doi.org/10.1007/bf00125524

1976-01-01

Journal of Elasticity

Abstract:Universal solutions for fiber-reinforced compressible isotropic elastic materials under large elastic deformations are obtained, by using inverse methods.

What problem does this paper attempt to address?

The United Point Force Solution For Both Isotropic And Transversely Isotropic Media

DING HAOJIANG,LIANGJIAN,CHENBUO

DOI: https://doi.org/10.1002/(SICI)1099-0887(199702)13:2<95::AID-CNM35>3.0.CO;2-F

1997-01-01

Communications in Numerical Methods in Engineering

Abstract:This paper treats a united-form solution for a point force applied at the interior of an infinite transversely isotropic solid. Several heuristic functions are adopted to obtain the expressions of the solution based on the general solution. To exclude some indeterminate attributes, the expressions are rewritten. In the final expressions, unlike previous publications where the solutions are expressed in different forms, or when some individual constants have different definitions depending on the conditions satisfied by the elastic constants, we provide united solutions which are suitable for all stable transversely isotropic materials and isotropic materials. Thus accurate numerical evaluation of the boundary element method can be performed directly without the need to resolve the singularity algebraically. Some numerical examples with BEM are also presented in this paper. (C) 1997 by John Wiley & Sons, Ltd.
Inflation Bending Extension and Azimuthal Shearing of a Fiber-Reinforced Elastic Sector of a Circular Tube

E. C. Aifantis,D. E. Beskos

DOI: https://doi.org/10.1007/bf01177143

IF: 2.645

1977-01-01

Acta Mechanica

Abstract:Universal solutions for the deformation of inflation, bending, extension and azimuthal shearing of a fiber-reinforced sector of a circular tube are obtained by inverse methods. The material is assumed to be isotropic and non-linear elastic, incompressible or compressible. The reinforcement consists of inextensible fibers along theR or Θ orZ directions or in one or two sets of helical path. The surface tractions and the corresponding forces to support the deformation are determined. A discussion is made about the strengthening of the material due to the reinforcement, the sign of the tension in the fibers and the deformed configuration of the fibers.
Universal Displacements in Inextensible Fiber-Reinforced Linear Elastic Solids

Arash Yavari

2023-07-01

Abstract:For a given class of materials, universal displacements are those displacements that can be maintained for any member of the class by applying only boundary tractions. In this paper we study universal displacements in compressible anisotropic linear elastic solids reinforced by a family of inextensible fibers. For each symmetry class and for a uniform distribution of straight fibers respecting the corresponding symmetry we characterize the respective universal displacements. A goal of this paper is to investigate how an internal constraint affects the set of universal displacements. We have observed that other than the triclinic and cubic solids in the other five classes (a fiber-reinforced solid with straight fibers cannot be isotropic) the presence of inextensible fibers enlarges the set of universal displacements.

Materials Science
Solutions Of Elastic Stress Field In Fiber Composites

G. Y. Li,J. S. Lian,X. L. Liu,Z. H. Jiang

2006-01-01

Abstract:Analytical solutions of the elastic stress field in composites reinforced by short fibers or continuous fibers with a partially debonded matrix/fiber interface following the Coulomb friction law have been derived on the elasticity theory. The solution in matrix satisfies exactly the equilibrium and compatibility conditions and the solution in fiber satisfies the equilibrium requirements between fiber and matrix and both satisfy the overall boundary conditions. Considerable good agreements with,the finite element numerical predictions have been obtained.
The universal program of linear elasticity

Arash Yavari,Alain Goriely

DOI: https://doi.org/10.1177/10812865221091305

2022-05-08

Mathematics and Mechanics of Solids

Abstract:Mathematics and Mechanics of Solids, Ahead of Print. Universal displacements are those displacements that can be maintained, in the absence of body forces, by applying only boundary tractions for any material in a given class of materials. Therefore, equilibrium equations must be satisfied for arbitrary elastic moduli for a given anisotropy class. These conditions can be expressed as a set of partial differential equations for the displacement field that we call universality constraints. The classification of universal displacements in homogeneous linear elasticity has been completed for all the eight anisotropy classes. Here, we extend our previous work by studying universal displacements in inhomogeneous anisotropic linear elasticity assuming that the directions of anisotropy are known. We show that universality constraints of inhomogeneous linear elasticity include those of homogeneous linear elasticity. For each class and for its known universal displacements, we find the most general inhomogeneous elastic moduli that are consistent with the universality constrains. It is known that the larger the symmetry group, the larger the space of universal displacements. We show that the larger the symmetry group, the more severe the universality constraints are on the inhomogeneities of the elastic moduli. In particular, we show that inhomogeneous isotropic and inhomogeneous cubic linear elastic solids do not admit universal displacements and we completely characterize the universal inhomogeneities for the other six anisotropy classes.

mechanics,materials science, multidisciplinary,mathematics, interdisciplinary applications
Universal Deformations and Inhomogeneities in Isotropic Cauchy Elasticity

Arash Yavari

2024-05-15

Abstract:For a given class of materials, \emph{universal deformations} are those deformations that can be maintained in the absence of body forces and by applying solely boundary tractions. For inhomogeneous bodies, in addition to the universality constraints that determine the universal deformations, there are extra constraints on the form of the material inhomogeneities -- \emph{universal inhomogeneity constraints}. Those inhomogeneities compatible with the universal inhomogeneity constraints are called \emph{universal inhomogeneities}. In a Cauchy elastic solid, stress at a given point and at an instance of time is a function of strain at that point and that exact moment in time, without any dependence on prior history. A Cauchy elastic solid does not necessarily have an energy function, i.e., Cauchy elastic solids are, in general, non-hyperelastic (or non-Green elastic). In this paper we characterize universal deformations in both compressible and incompressible inhomogeneous isotropic Cauchy elasticity. As Cauchy elasticity includes hyperelasticity, one expects the universal deformations of Cauchy elasticity to be a subset of those of hyperelasticity both in the compressible and incompressible cases. It is also expected that the universal inhomogeneity constraints to be more strict than those of hyperelasticity, and hence, the set of universal inhomogeneities to be smaller than that of hyperelasticity. We prove the unexpected result that the sets of universal deformations of isotropic Cauchy elasticity and isotropic hyperelasticity are identical, in both the compressible and incompressible cases. We also prove that their corresponding universal inhomogeneities are identical as well.

Classical Physics,Materials Science
Mechanics of an elastic solid reinforced with bidirectional fiber in finite plane elastostatics: complete analysis

Mahdi Zeidi,Chun I. L. Kim

DOI: https://doi.org/10.1007/s00161-018-0623-0

2018-01-29

Continuum Mechanics and Thermodynamics

Abstract:A continuum-based model is presented for the mechanics of bidirectional composites subjected to finite plane deformations. This is framed in the development of a constitutive relation within which the constraint of material incompressibility is augmented. The elastic resistance of the fibers is accounted for directly via the computation of variational derivatives along the lengths of bidirectional fibers. The equilibrium equation and necessary boundary conditions are derived by virtue of the principles of virtual work statement. A rigorous derivation of the corresponding linear theory is developed and used to obtain a complete analytical solution for small deformations superposed on large. The proposed model can serve as an alternative 2D Cosserat theory of nonlinear elasticity.

thermodynamics,mechanics
An accurate, robust, and efficient finite element framework for anisotropic, nearly and fully incompressible elasticity

Elias Karabelas,Matthias A. F. Gsell,Gundolf Haase,Gernot Plank,Christoph M. Augustin

DOI: https://doi.org/10.1016/j.cma.2022.114887

2021-11-01

Abstract:Fiber-reinforced soft biological tissues are typically modeled as hyperelastic, anisotropic, and nearly incompressible materials. To enforce incompressibility a multiplicative split of the deformation gradient into a volumetric and an isochoric part is a very common approach. However, due to the high stiffness of anisotropic materials in the preferred directions, the finite element analysis of such problems often suffers from severe locking effects and numerical instabilities. In this paper, we present novel methods to overcome locking phenomena for anisotropic materials using stabilized P1-P1 elements. We introduce different stabilization techniques and demonstrate the high robustness and computational efficiency of the chosen methods. In several benchmark problems we compare the approach to standard linear elements and show the accuracy and versatility of the methods to simulate anisotropic, nearly and fully incompressible materials. We are convinced that this numerical framework offers the possibility to accelerate accurate simulations of biological tissues, enabling patient-specfic parameterization studies, which require numerous forward simulations.

Numerical Analysis,Applied Physics
Simulation of fiber-reinforced viscoelastic structures subjected to finite strains: multiplicative approach

I. I. Tagiltsev,P.P. Laktionov,A.V. Shutov

DOI: https://doi.org/10.1007/s11012-018-0909-0

2018-06-08

Abstract:The study is devoted to the geometrically nonlinear simulation of fiber-reinforced composite structures. The applicability of the multiplicative approach to the simulation of viscoelastic properties of a composite material is assessed, certain improvements are suggested. For a greater accuracy in applications involving local compressive fiber buckling, a new family of hyperelastic potentials is introduced. This family allows us to account for the variable critical compressive stress, which depends on the fiber-matrix interaction. For the simulation of viscoelasticity, the well-established Sidoroff decomposition of the deformation gradient is implemented. To account for the viscosity of the matrix material, the model of Simo and Miehe (1992) is used; highly efficient iteration-free algorithms are implemented. The viscosity of the fiber is likewise described by the multiplicative decomposition of the deformation gradient, leading to a scalar differential equation; an efficient iteration-free algorithm is proposed for the implicit time stepping. The accuracy and convergence of the new iteration-free method is tested and compared to that of the standard scheme implementing the Newton iteration. To demonstrate the applicability of the approach, a pressurized multi-layer composite pipe is modelled; the so-called stretch inversion phenomenon is reproduced and explained. The stress distribution is obtained by a semi-analytical procedure; it may serve as a benchmark for FEM computations. Finally, the issue of the parameter identification is addressed.

Applied Physics,Soft Condensed Matter
Exactly isochoric deformations of soft solids

J. S. Biggins,Z. Wei,L. Mahadevan

DOI: https://doi.org/10.1209/0295-5075/108/64001

2014-07-08

Abstract:Many materials of contemporary interest, such as gels, biological tissues and elastomers, are easily deformed but essentially incompressible. Traditional linear theory of elasticity implements incompressibility only to first order and thus permits some volume changes, which become problematically large even at very small strains. Using a mixed coordinate transformation originally due to Gauss, we enforce the constraint of isochoric deformations exactly to develop a linear theory with perfect volume conservation that remains valid until strains become geometrically large. We demonstrate the utility of this approach by calculating the response of an infinite soft isochoric solid to a point force that leads to a nonlinear generalization of the Kelvin solution. Our approach naturally generalizes to a range of problems involving deformations of soft solids and interfaces in 2 dimensional and axisymmetric geometries, which we exemplify by determining the solution to a distributed load that mimics muscular contraction within the bulk of a soft solid.

Soft Condensed Matter,Materials Science,Biological Physics,Fluid Dynamics
Versatile stabilized finite element formulations for nearly and fully incompressible solid mechanics

Elias Karabelas,Gundolf Haase,Gernot Plank,Christoph M. Augustin

DOI: https://doi.org/10.1007/s00466-019-01760-w

IF: 4.391

2019-09-11

Computational Mechanics

Abstract:Abstract Computational formulations for large strain, polyconvex, nearly incompressible elasticity have been extensively studied, but research on enhancing solution schemes that offer better tradeoffs between accuracy, robustness, and computational efficiency remains to be highly relevant. In this paper, we present two methods to overcome locking phenomena, one based on a displacement-pressure formulation using a stable finite element pairing with bubble functions, and another one using a simple pressure-projection stabilized $$\mathbb {P}_1 - \mathbb {P}_1$$ P 1 - P 1 finite element pair. A key advantage is the versatility of the proposed methods: with minor adjustments they are applicable to all kinds of finite elements and generalize easily to transient dynamics. The proposed methods are compared to and verified with standard benchmarks previously reported in the literature. Benchmark results demonstrate that both approaches provide a robust and computationally efficient way of simulating nearly and fully incompressible materials.

mechanics,mathematics, interdisciplinary applications
ANALYTICAL SOLUTIONS FOR ELASTOSTATIC PROBLEMS OF PARTICLE-AND FIBER-REINFORCED COMPOSITES WITH INHOMOGENEOUS INTERPHASES

Duan Hui-ling,Wang Jian-xiang,Huang Zhu-ping,Huang Hong-bo

DOI: https://doi.org/10.1007/bf02440084

2005-01-01

Applied Mathematics and Mechanics

Abstract:By transforming the governing equations for displacement components into Riccati equations, analytical solutions for displacements, strains and stresses for Representive Volume Elements (RVEs) of particle- and fiber-reinforced composites containing inhomogenous interphases were obtained. The analytical solutions derived here are new and general for power-law variations of the elastic moduli of the inhomogeneous interphases. Given a power exponent, analytical expressions for the bulk moduli of the composites with inhomogenous interphases can be obtained. By changing the power exponent and the coefficients of the power terms, the solutions derived here can be applied to inhomogeneous interphases with many different property profiles. The results show that the modulus variation and the thickness of the inhomogeneous interphase have great effect on the bulk moduli of the composites. The particle will exhibit a sort of “size effect”, if there is an interphase.
Some Invariant Solutions of Two-Dimensional Elastodynamics in Linear Homogeneous Isotropic Materials

Houguo Li,Kefu Huang

DOI: https://doi.org/10.4208/aamm.12-m1257

2013-01-01

Advances in Applied Mathematics and Mechanics

Abstract:Invariant solutions of two-dimensional elastodynamics in linear homogeneous isotropic materials are considered via the group theoretical method. The second order partial differential equations of elastodynamics are reduced to ordinary differential equations under the infinitesimal operators. Three invariant solutions are constructed. Their graphical figures are presented and physical meanings are elucidated in some cases.
A Unified Determinant-Preserving Formulation for Compressible/Incompressible Finite Viscoelasticity

Ignasius P A Wijaya,Oscar Lopez-Pamies,Arif Masud

DOI: https://doi.org/10.1016/j.jmps.2023.105312

Abstract:This paper presents a formulation alongside a numerical solution algorithm to describe the mechanical response of bodies made of a large class of viscoelastic materials undergoing arbitrary quasistatic finite deformations. With the objective of having a unified formulation that applies to a wide range of highly compressible, nearly incompressible, and fully incompressible soft organic materials in a numerically tractable manner, the viscoelasticity is described within a Lagrangian setting by a two-potential mixed formulation. In this formulation, the deformation field, a pressure field that ensues from a Legendre transform, and an internal variable of state Fv that describes the viscous part of the deformation are the independent fields. Consistent with the experimental evidence that viscous deformation is a volume-preserving process, the internal variable Fv is required to satisfy the constraint det Fv=1. To solve the resulting initial-boundary-value problem, a numerical solution algorithm is proposed that is based on a finite-element (FE) discretization of space and a finite-difference discretization of time. Specifically, a Variational Multiscale FE method is employed that allows for an arbitrary combination of shape functions for the deformation and pressure fields. To deal with the challenging non-convex constraint det Fv=1, a new time integration scheme is introduced that allows to convert any explicit or implicit scheme of choice into a stable scheme that preserves the constraint det Fv=1 identically. A series of test cases is presented that showcase the capabilities of the proposed formulation.
An Approach to Elastoplasticity at Large Deformations

Konstantin Volokh

DOI: https://doi.org/10.1016/j.euromechsol.2012.11.002

2012-04-12

Abstract:Finite plasticity theories are still a subject of controversy and lively discussions. Among the approaches to finite elastoplasticity two became especially popular. The first, implemented in the commercial finite element codes, is based on the introduction of a hypoelastic constitutive law and the additive elastic-plastic decomposition of the deformation rate tensor. Unfortunately, the use of hypoelasticity may lead to a nonphysical creation or dissipation of energy in a closed deformation cycle. In order to replace hypoelasticity with hyperelasticity the second popular approach based on the multiplicative elastic-plastic decomposition of the deformation gradient tensor was developed. Unluckily, the latter theory is not perfect as well because it introduces intermediate plastic configurations, which are geometrically incompatible, non-unique, and, consequently, fictitious physically. In the present work, an attempt is made to combine strengths of the described approaches avoiding their drawbacks. Particularly, a tensor of the plastic deformation rate is introduced in the additive elastic-plastic decomposition of the velocity gradient. This tensor is used in the flow rule defined by the generalized isotropic Reiner-Rivlin fluid. The tensor of the plastic deformation rate is also used in an evolution equation that allows calculating an elastic strain tensor which, in its turn, is used in the hyperelastic constitutive law. Thus, the present approach employs hyperelasticity and the additive decomposition of the velocity gradient avoiding nonphysical hypoelasticity and the multiplicative decomposition of the deformation gradient associated with incompatible plastic configurations. The developed finite elastoplasticity framework for isotropic materials is specified to extend the classical -theory of metal plasticity to large deformations and the simple shear deformation is analyzed.

Materials Science,Classical Physics
Controllable Deformations in Compressible Isotropic Implicit Elasticity

Arash Yavari,Alain Goriely

2024-05-28

Abstract:For a given material, \emph{controllable deformations} are those deformations that can be maintained in the absence of body forces and by applying only boundary tractions. For a given class of materials, \emph{universal deformations} are those deformations that are controllable for any material within the class. In this paper, we characterize the universal deformations in compressible isotropic implicit elasticity defined by solids whose constitutive equations, in terms of the Cauchy stress $\boldsymbol{\sigma}$ and the left Cauchy-Green strain $\mathbf{b}$, have the implicit form $\boldsymbol{\mathsf{f}}(\boldsymbol{\sigma},\mathbf{b})=\mathbf{0}$. We prove that universal deformations are homogeneous. However, an important observation is that, unlike Cauchy (and Green) elasticity, not every homogeneous deformation is permissible for a given implicit-elastic solid. In other words, the set of universal deformations is material-dependent, yet it remains a subset of homogeneous deformations.

Materials Science
Universal Connections of Elastic Fibrous,Composites: Some New Results

T Chen,QS Zheng

DOI: https://doi.org/10.1016/s0020-7683(99)00003-7

IF: 3.667

2000-01-01

International Journal of Solids and Structures

Abstract:Universal connections between the overall moduli of elastic fibrous composites are explored. For any medium that can be represented by certain characterization functions, we show that its effective modulus tensors follow similar constraints as those for Hill’s connections for a two-phase fibrous composite. Some new standpoints are proposed, which reveal that the connections remain valid for media containing cavities or rigid inclusions. In addition, connections are devised to accomodate the case in which the composite consists of phases with identical eigenmoduli. We show that, in this particular case, it often provides additional constraints to the overall moduli of the composite. Specific results are given in analytic forms for two-phase fibrous composites with transversely isotropic phases, and with square-symmetric phases.
Explicit Solutions in Isotropic Planar Elastostatics

Andreas Granath,Per Åhag,Antti Perälä,Rafał Czyż

2023-10-20

Abstract:Addressing the intricate challenges in plane elasticity, especially with non-vanishing traction and complex geometries, requires innovative methods. This paper offers a novel approach, drawing inspiration from the Neumann problem for the inhomogeneous Cauchy-Riemann problem. Our method caters to domains that are conformally equivalent to a unit disk or annulus and emphasizes deriving explicit solutions for the displacement field rather than the stress tensor, differentiating it from most traditional methods. We explore solutions for specific traditional cases to demonstrate its efficacy, such as a cardioid domain, a ring domain with a shifted hole, and a gear-like structure. This work augments the existing toolbox for researchers and practitioners addressing isotropic planar elastostatics challenges, presenting a unified and flexible approach.

Materials Science,Complex Variables
Data-Driven Finite Elasticity

Sergio Conti,Stefan Müller,Michael Ortiz

DOI: https://doi.org/10.1007/s00205-020-01490-x

2020-01-23

Abstract:We extend to finite elasticity the Data-Driven formulation of geometrically linear elasticity presented in Conti, Müller, Ortiz, Arch.\ Ration.\ Mech.\ Anal.\ 229, 79-123, 2018. The main focus of this paper concerns the formulation of a suitable framework in which the Data-Driven problem of finite elasticity is well-posed in the sense of existence of solutions. We confine attention to deformation gradients $F \in L^p(\Omega;\mathbb{R}^{n\times n})$ and first Piola-Kirchhoff stresses $P \in L^q(\Omega;\mathbb{R}^{n\times n})$, with $(p,q)\in(1,\infty)$ and $1/p+1/q=1$. We assume that the material behavior is described by means of a material data set containing all the states $(F,P)$ that can be attained by the material, and develop germane notions of coercivity and closedness of the material data set. Within this framework, we put forth conditions ensuring the existence of solutions. We exhibit specific examples of two- and three-dimensional material data sets that fit the present setting and are compatible with material frame indifference.

Analysis of PDEs

Universal Solutions for Fiber-Reinforced Compressible Isotropic Elastic Materials

The United Point Force Solution For Both Isotropic And Transversely Isotropic Media

Inflation Bending Extension and Azimuthal Shearing of a Fiber-Reinforced Elastic Sector of a Circular Tube

Universal Displacements in Inextensible Fiber-Reinforced Linear Elastic Solids

Solutions Of Elastic Stress Field In Fiber Composites

The universal program of linear elasticity

Universal Deformations and Inhomogeneities in Isotropic Cauchy Elasticity

Mechanics of an elastic solid reinforced with bidirectional fiber in finite plane elastostatics: complete analysis

An accurate, robust, and efficient finite element framework for anisotropic, nearly and fully incompressible elasticity

Simulation of fiber-reinforced viscoelastic structures subjected to finite strains: multiplicative approach

Exactly isochoric deformations of soft solids

Versatile stabilized finite element formulations for nearly and fully incompressible solid mechanics

ANALYTICAL SOLUTIONS FOR ELASTOSTATIC PROBLEMS OF PARTICLE-AND FIBER-REINFORCED COMPOSITES WITH INHOMOGENEOUS INTERPHASES

Some Invariant Solutions of Two-Dimensional Elastodynamics in Linear Homogeneous Isotropic Materials

A Unified Determinant-Preserving Formulation for Compressible/Incompressible Finite Viscoelasticity

An Approach to Elastoplasticity at Large Deformations

Controllable Deformations in Compressible Isotropic Implicit Elasticity

Universal Connections of Elastic Fibrous,Composites: Some New Results

Explicit Solutions in Isotropic Planar Elastostatics

Data-Driven Finite Elasticity