Abstract:With the rapid development of key industries such as new energy vehicles, smart homes, smart phones and consumer grade drones, the demand for high performance miniature micro- pressure sensors is also growing promptly. At prssent, most of the pressure sensors of this type adopt a C-type structure, and the thickness of the sensitive diaphragm needs to be continuously thinned in order to improve the sensitivity of this type sensor, which leads to its sensitivity to etching errors and makes it difficult to ensure the linearity of the pressure sensor. Based on this, we designed a miniature micro-pressure half active Wheatstone bridge piezoresistive pressure sensor with C-type square diaphragm structure, whose area is reduced by shortening the number of leads and pads, through ion impantation on the surface of the diaphragm to create a piezoresistors, using deep reactive ion etching (DRIE) technology to release the pressure sensitive diaphragm with length of 460 μm × 460 μm, thinkness of 7.5 μm. The buried oxygen layer in the SOI(silicon on insulator) can play a role of stopping the etching, which assures the uniformity of the released sensitive diaphragm and the non-linear errors of the sensor while maintains its sensitivity. In this paper, the influence of piezoresistor position offset on the performance of the pressure sensor is analyzed by means of simulation, which improves the accuracy of the designed model and guarantees its performance parameters can meet the design indicators. Finally, the static characteristics of the sensor is calibrated. The experimental results show that the sensitivity of the sensor is up to 0.538 mV kPa-1/3.5 V in the range of 40 kPa at room temperature, and the non-linear error is only 0.386 % FS. This study provides some new ideas and references for the design work of high performance micro-pressure sensors.

Simulation Method for the Sensitivity and Linearity of Piezoresistive Pressure Sensors

A Soft Piezoresistive Pressure Sensor Based on Porous Conductive CB/PDMS Composite

A Flexible Crosstalk-Free Piezoresistive Pressure Sensor Array Based on Interdigital-Electrode for High-Precision Pressure Mapping

Methods of Superior Design for the Full Scale Output of Piezoresistive Pressure Sensors

Simulation Methods of Piezoresistive Pressure Sensors in Order to Improve Consistency

A novel pressure sensor design for low pressure ranges

Research for piezoresistive pressure sensors: Methods to reduce the influence of processing deviation on sensitivity and improve product consistency

Method for Sensitivity Improvement and Optimal Design of A Piezoresistive Pressure Sensor

Surface-modified Piezoresistive Nanocomposite Flexible Pressure Sensors with High Sensitivity and Wide Linearity.

Design and fabrication of a tiny micro-pressure sensor with improved linearity and sensitivity

A Diaphragm Secondary Stress Utilization Method for Increasing the Sensitivity of Piezoresistive Pressure Sensors Without Sacrificing Linearity

Computer simulation of polysilicon piezoresistive pressure sensors

The Design and Optimization of a Highly Sensitive and Overload-Resistant Piezoresistive Pressure Sensor.

High Sensitive and Linear Pressure Sensor for Ultra-low Pressure Measurement

Systematically Probing the Effect of Microscopic Features on the Sensing Performance of Piezoresistive Pressure Sensors

Design optimization of high pressure and high temperature piezoresistive pressure sensor for high sensitivity

High-Pressure Sensor With High Sensitivity and High Accuracy for Full Ocean Depth Measurements

Research on Design and Nonlinear of Piezoelectric Pressure Sensor

Design, Fabrication, and Dynamic Environmental Test of a Piezoresistive Pressure Sensor

Characterization and Analysis of a Novel Structural SOI Piezoresistive Pressure Sensor with High Sensitivity and Linearity

A piezoresistive pressure sensor with centralized piezoresistors and a diamond-shape composite diaphragm