Abstract:The rapid charge-discharge and wide operating temperature range are of great significance to the research of lithium-sulfur batteries. However, the poor electronic and ionic conductivity of sulfurized polyacrylonitrile limits the high-rate and low-temperature performance of lithium-sulfur batteries. In this work, a tellurium-doped sulfurized polyacrylonitrile nanofibers-based cathode material (Te 0.02 S 0.98 FPAN) is successfully fabricated by air-blow spinning for lithium-sulfur batteries. It is found that Te 0.02 S 0.98 FPAN maintained a high reversible specific capacity of 742 mAh·g −1 composites after 200 cycles at a current density of 0.2 C (0.014% decay per cycle), whereas it provides a reversible specific capacity of 641 mAh·g −1 composites after 500 cycles even at a large current density of 1.0 C (0.021% decay per cycle), manifesting its excellent high-rate performance. Moreover, Te 0.02 S 0.98 FPAN still maintained a high reversible specific discharge capacity of 586 mAh·g −1 composites after 100 cycles at 0.2 C at a low temperature of 5.0 °C, confirming its wide operating temperature range. Both the eutectic accelerator (tellurium) and the one-dimensional nanofibrous structure greatly improve the migration rate and electron transport ability of Li + ions, enhancing reaction kinetics and providing fast and stable migration channels for ions and electrons. Therefore, Te 0.02 S 0.98 FPAN has a higher oxidation-reduction reaction rate and less polarization. This study not only provides new ideas for the cathode design of lithium-sulfur batteries with high rate and wide temperature range, but also paves the way for the development of practical lithium-sulfur batteries. In particular, when tested in practical conditions of high areal loading (Te 0.02 S 0.98 : 5.0 mg cm −2 ) and lean electrolyte (E/Te 0.02 S 0.98 : 10 μL mg −1 ), this cathode delivers high reversible capacities of 725 mAh g −1 composite (0.1 C) and 663 mAh g −1 composite (0.2 C), demonstrating its great potential for future application.

Sulfur composite cathode materials: comparative characterization of polyacrylonitrile precursor

Analysis of the synthesis process of sulphur-poly(acrylonitrile)-based cathode materials for lithium batteries

Kinetic investigation of sulfurized polyacrylonitrile cathode material by electrochemical impedance spectroscopy

Core-Shell Sulfur@Polypyrrole Composites As High-Capacity Materials for Aqueous Rechargeable Batteries

Sulfur Composite Cathode Materials for Rechargeable Lithium Batteries

Polyisoprene Captured Sulfur Nanocomposite Materials for High-Areal-Capacity Lithium Sulfur Battery

Charge/discharge Characteristics of Sulfurized Polyacrylonitrile Composite with Different Sulfur Content in Carbonate Based Electrolyte for Lithium Batteries

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery

Electrochemical Characteristics of Sulfur Composite Cathode Materials in Rechargeable Lithium Batteries

Understanding the Role of Different Conductive Polymers in Improving the Nanostructured Sulfur Cathode Performance.

Lamellar Polypyrene Based on Attapulgite–Sulfur Composite for Lithium–Sulfur Battery

Novel Polyaniline–Silver–Sulfur Nanotube Composite as Cathode Material for Lithium–Sulfur Battery

Preparation and Electrochemical Evaluation of Porous Carbon-Sulfur Composite Cathode Materials for High Performance Lithium/Sulfur Cells

Polymer lithium cells with sulfur composites as cathode materials

Water-Soluble Polyacrylic Acid as a Binder for Sulfur Cathode in Lithium-Sulfur Battery

Lithium-sulfur battery cathode enabled by lithium-nitrile interaction

Nitrogen-doped Porous Carbon Nanofiber Webs/sulfur Composites As Cathode Materials for Lithium-Sulfur Batteries

Research Progress in Sulfur-Rich Polymers Cathode Materials for Li-ion Batteries

Synthesis of nano Sb-encapsulated pyrolytic polyacrylonitrile composite for anode material in lithium secondary batteries

Construction of high-rate performance sulfurized Poly(acrylonitrile) nanofibers cathodes for practical lithium–sulfur batteries via tellurium catalytic regulation

An electrochemical and structural investigation of porous composite anode materials for LIB