Abstract:The ductile forming process of a polymer in a standard screw extruder and pin-barrel extruder, equipped with or without a field synergy elongation screw, was investigated by the finite element method. In order to assess the mixing and heat transfer capabilities of screws, characteristic parameters such as the mixing efficiency, segregation scale, and temperature distribution of different structures were analyzed and compared. The results indicated that the flow pattern of the polymer melt in the extruder was significantly influenced by the screw structure and was improved by the newly designed field synergy screw configuration, which brought a desirable elongational flow to enhance the radial convection. This was attributed to the unique radial wedge-shaped repeated convergence region of the field synergy elongation screw, increasing the synergistic effect between the velocity field, velocity gradient field, and temperature gradient field and thus improving the heat transfer and mixing efficiency. After adding barrel pins, the flow was forced to split, resulting in a more significant stretching effect on the melt. The field synergy effect in the pin mixed region was strengthened, which further increased the heat and mass transfer efficiency of the screw. However, increasing barrel pins could also lead to undesired temperature fluctuation and flow resistance, which have a negative impact on the melt uniformity. This study offers an important reference for optimizing screw structure to obtain strong mixing and heat transfer performances.

Numerical Simulation of Flow Characteristics of Co-Rotating Intermeshing Four-Screw Extruder

Evolution of residence time distribution and fill degree in co-rotating twin-screw extruder

Hydrodynamics and mixing process in a horizontal self-cleaning opposite-rotating twin-shaft kneader

Computer Simulation of Extrusion Process of Intermeshing Co-Rotating Twin Screw Extruders

Study of Dynamic Flow and Mixing Performances of Tri-Screw Extruders with Finite Element Method

Effect of Dynamic Center Region on the Flow and Mixing Efficiency in a New Tri-Screw Extruder Using 3D Finite Element Modeling

Numerical study of mixing dynamics inside the novel elements of a corotating nontwin screw extruder

Numerical Simulation of Hydrodynamics and Mixing Characteristics of High-Viscosity Non-Newtonian Fluid in Twin-Shaft Kneaders

Three-dimensional Numerical Study of the Mixing Behaviour of Twin-screw Elements

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

Numerical simulation of filling flow of polymer melt in injection molding

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Analysis on Melting Mechanism in the Cross Section of Co-Rotating Twin Screw Extruder

Analysis of the Dispersive and Distributive Mixing Effect of Screw Elements on the Co-Rotating Twin-Screw Extruder with Particle Tracking

Numerical Simulation on Internal Flow in the Screw Centrifugal Pulp Pump

Numerical Simulation and Experimental Validation of Mixing Performance of Kneading Discs in A Twin Screw Extruder

Non-Isothermal Simulation of Melting Process in Twin Screw Extruder Based on Two Typical Screw Configurations

Mixing and Thermal Transport Behavior in a Pin or Non-Pin Extruder Equipped with a Field Synergy Elongation Screw

Study on Simulation of Molten Polymer Flow in the Screw Groove

Study on Polymer Flow Profile in Micro Hot Embossing

Effects of Screw Clearance and Blend Ratio on the Flow and Mixing Characteristics of Tri-Screw Extruders in Cross Section with CFD