Abstract:Since most of the cable-driven parallel manipulators (CDPMs) are small in dimension or low in speed, the self-weight or inertia of the cable is neglected when dealing with the problems of kinematics, dynamics and workspace. The cable is treated as a massless straight line, and the inertia of the cable is not discussed. However, the camera robot is a large-span high-speed CDPM. Thus, the self-weight and inertia of the cable cannot be negligible. The curved cable due to the self-weight is modeled as a catenary to accurately account for its sagging effect. Moreover, the dynamic model of the camera robot is derived by decomposing the motion of the cable into an in-plane motion and an out-plane motion, based on which an iterative-based tension distribution algorithm and a workspace generation algorithm are presented. An optimization model is presented to simultaneously improve the workspace volume, anti-wind disturbance ability and impulse of tensions on the camera and pan–tilt device system (CPTDS) by selecting the proper optimal variables under the linear and nonlinear constraints. An improved genetic algorithm (GA) is proposed, and the simulation results demonstrate that the improved GA offers a stronger ability in global optimization compared to the standard genetic algorithm (SGA). The ideal-point method is employed to avoid the subjective influence of the designer when performing the multi-objective optimization, and a remarkable improvement of the performance is obtained through the optimization. Furthermore, the distribution characteristics of the optimization objects are studied, and some valuable conclusions are summarized, which will provide some valuable references in designing large-span high-speed CDPMs.

Error analysis and compensation of cable driven parallel manipulators for the forty-meter aperture radio telescope

Displacement Compensation Analysis Method and Application in Correction of Cable Force in Structures

Graded Error Compensation Method for Heavy-Load Manipulators Based on Laser Tracking Measurement

A Modeling Method of the Cable Driven Parallel Manipulator for FAST

Modeling and Compensation of Volumetric Errors for a Six-Axis Automated Fiber Placement Machine Based on Screw Theory

Optimization of Cable Tensions of a Cable-Driven Parallel Manipulator for a Large Radio Telescope

Analysis and design of 3T cable-driven parallel manipulator for the feedback’s orientation of the large radio telescope

Non-Linear Displacement Control of Prestressed Cable Structures

Error Modeling and Accuracy Analysis of A Multi-Level Hybrid Support Robot

Measurement, Identification, and Compensation of Pose Errors for Six-Axis Gantry Automated Fiber Placement Machine

Analysis and a Simplified Model of the Cable of a Large-Scale Flexible Parallel Manipulator for a Large Radio Telescope

Dimensional Optimization Design of the Four-Cable-Driven Parallel Manipulator in FAST

Modeling and Control Study of Cable-Driven Parallel Manipulator for FAST

Static Deformation-Compensation Method Based On Inclination-Sensor Feedback For Large-Scale Manipulators With Hydraulic Actuation

Research on the Orientation Error of the Translational Cable-Driven Parallel Robots

Modeling and Workplace Analysis of 3t Cable-Driven Parallel Manipulator

Dynamic Modeling, Workspace Analysis and Multi-Objective Structural Optimization of the Large-Span High-Speed Cable-Driven Parallel Camera Robot

On the analysis of active reflector supporting manipulator for the large spherical radio telescope

Terminal Accuracy Analysis of a Multi-level Hybrid Support System Based on Time-varying Barycenter

Trajectory Tracking Control for a Cable-Driven Space Manipulator Using Time-Delay Estimation and Nonsingular Terminal Sliding Mode

Dynamics Modeling and Analysis of Cable-Driven Segmented Manipulator Considering Friction Effects