Abstract:Layered transition-metal oxides have served as the mainstream cathode materials for high-energy batteries due to their large theoretical capacity (≈280mAh/g),However, the actual usable capacity is much lower than the promised theoretical value. Additional, poor cycling performance and the first-cycle Coulombic efficiency, for which Mn(II)-dissolution, its immobilization in solid electrolyte interface (SEI), oxidation of electrolytes by Ni, and other parasitic process thereat have been held responsible, weight against their applications.. Here we report a significant enhancement of cathode capacity utilization through a novel concept of material design. By embedding Li(Ni0.5Co0.2Mn0.3)O2 in single wall carbon nanotube (CNT) network, a high charge/discharge reversible capacity up to about 250 mAh/g was obtained between 3.0-4.8V. Furthermore, to maintain this high capacity in long-term cycling, we proposes a unique “pre-lithiation process”, which brought the cathode to low potentials before regular cycling and led to an interphase that is normally formed only on anode surfaces. The complete coverage of cathode surface by this ~40 nm-thick interphase effectively prevented Mn(II) dissolution and minimized the side reactions of Ni, Co and Mn at the NMC interface during the subsequent cycling process. More importantly, such “pre-lithiation” process activated a structure containing two Li layers near the surface of NMC532 particles, as verified by XRD and first principle calculation. Hence, a new cathode material of both high capacity with depolarized structure; and excellent cycling performance was generated.

Net-structured NiO–C nanocomposite as Li-intercalation electrode material

Electrochemical Properties of NiO–Ni Nanocomposite As Anode Material for Lithium Ion Batteries

In-situ electrolytic synthesis and superior lithium storage capability of Ni–NiO/C nanocomposite by sacrificial nickel anode in molten carbonates

Electrochemical performances of NiO/Ni2N nanocomposite thin film as anode material for lithium ion batteries

Li0.68Ni1.32O2/Ag nanocomposite: A Li-intercalation anode material with higher coulombic efficiency and better cycling performance

Easy access to nitrogen-doped mesoporous interlinked carbon/NiO nanosheet for application in lithium-ion batteries and supercapacitors

Spherical NiO-C composite for anode material of lithium ion batteries

Selective Carbon Coating Techniques for Improving Electrochemical Properties of NiO Nanosheets

Enhanced compacting density and cycling performance of Ni-riched electrode via building mono dispersed micron scaled morphology

Net-Structured Co3o4/C Nanosheet Array with Enhanced Electrochemical Performance Toward Lithium Storage

Preparation of NCM622 cathode materials using nanoscale porous NiO material

NiO/CNTs derived from metal-organic frameworks as superior anode material for lithium-ion batteries

Mixed-conducting Interlayer Boosting the Electrochemical Performance of Ni-rich Layered Oxide Cathode Materials for Lithium Ion Batteries

Mesoporous carbons and Fe collectively boost the capacity increases upon Long-term cycling of Ni/Fe/NiFe2O4@C anode for Lithium-ion batteries

Synthesis and electrochemical characterization of LiCo 1/3 Ni 1/3 Mn 1/3 O 2 by radiated polymer gel method

Porous nanocomposites by cotton-derived carbon/NiO with high performance for lithium-ion storage

NiCo-MOF derived nanostructured NiCo-LDH@Ni(OH) 2 heterogeneous composite as electrode material for hybrid supercapacitors

Nanofibrous Ni-Nanoparticle-SnO2-Carbon Composites for Lithium Storage

Nano/micro-structured Si/CNT/C composite from nano-SiO2 for high power lithium ion batteries

Interphase Modification of Li(Ni0.5Co0.2Mn0.3)O2 Based Lithium Battery Electrode Materials by Depolarized and Pre-Lithiation for High Capacity and Cycling Performance

NiO/Graphene Nanocomposite As Anode Material for Lithium–Ion Batteries