Abstract:One of the most commonly used techniques in aerospace engineering is the RANS (Reynolds average Navier–Stokes) approach for calculating the transonic compressor flow field, where the accuracy of the computation is significantly affected by the turbulence model used. In this work, we use SA, SST, k-ɛ, and the PAFV turbulence model developed based on the side-biased mean fluctuations velocity and the mean strain rate tensor to numerically simulate the transonic compressor NASA Rotor 67 to evaluate the accuracy of turbulence modeling in numerical calculations of transonic compressors. The simulation results demonstrate that the four turbulence models are generally superior in the numerical computation of NASA Rotor 67, which essentially satisfies the requirements of the accuracy of engineering calculations; by comparing and analyzing the ability of the four turbulence models to predict the aerodynamic performance of transonic compressors and to capture the details of the flow inside the rotor. The errors of the Rotor 67 clogging flow rate calculated by the SA, SST, k-ɛ, and PAFV turbulence models with the experimental data are 0.9%, 0.8%, 0.7%, and 0.6%, respectively. The errors of the calculated peak efficiencies are 2.2%, 1.6%, 0.9%, and 4.9%. The SA and SST turbulence models were developed for the computational characteristics of the aerospace industry. Their computational stability is better and their outputs for Rotor 67 are comparable. The k-ɛ turbulence model calculates the pressure ratio and efficiency that are closest to the experimental data, but the computation of its details of the flow field near the wall surface is not ideal because the k-ɛ turbulence model cannot accurately capture the flow characteristics of the region of high shear stresses. The PAFV turbulence model has a better prediction of complex phenomena such as rotor internal shock wave location, shock–boundary layer interaction, etc., due to the use of a turbulent velocity scale in vector form, but the calculated rotor efficiency is small.

Turbulence Models Assessment for Large-Scale Tip Vortices in an Axial Compressor Rotor

ASSESSMENT OF TURBULENCE MODELS FOR THE PREDICTION OF LARGE-SCALE TIP VORTICES IN AN AXIAL COMPRESSOR ROTOR

Investigation of Vortex Structures Near Tip Region in a Transonic Axial Flow Compressor Rotor

Investigation of turbulence models for aerodynamic analysis of a high-pressure-ratio centrifugal compressor

Comparison of Turbulence Modeling for a Compressor Rotor at Different Tip Clearances

Study of the Standard K-Ε Model for Tip Leakage Flow in an Axial Compressor Rotor

Investigation on the Performance Prediction of Single-Stage Axial Compressor by Using Different Turbulence Models

Experimental Investigation of Flow Characteristic of Tip Leakage Flow in an Axial Flow Compressor Rotor

Numerical Investigations into the Origin of Tip Unsteadiness in a Transonic Compressor

Performance of Unsteady Reynolds-Averaged Navier-Stokes and Hybrid Scale-Resolving Simulation Approaches in Simulating a Low-Speed Axial Compressor Rotor

Three-dimensional Flows Near Rotor Tip in an Axial Compressor Ⅰ——Experimental and Theoretical Studies

Numerical Investigation into the Mechanism Regarding the Inception and Evolution of Flow Unsteadiness Induced by the Tip Leakage Flow in a Transonic Compressor

Numerical Simulation of Transonic Compressors with Different Turbulence Models

Numerical Investigation into Unsteady Flow and Its Associated Flow Mechanism in a Transonic Compressor Rotor at Near Stall Conditions

Periodic Unsteadiness of Tip Clearance Vortex in an Axial Compressor Rotor

Numerical Simulation and Experimental Validation of Tip Leakage Vortex Breakdown under Large Clearance

Study on Unsteady Flow Characteristic in a Transonic Axial Compressor Rotor at Near Stall Condition

Evolution of the Tip Leakage Vortex in an Axial Compressor Rotor

Assessment of curvature correction and reattachment modification into the shear stress transport model within the subsonic axial compressor simulations

Investigation of Turbulence Characteristics in a Tip Leakage Flow Model Using Large-Eddy Simulation

Simulation Research of Effects of Turblence Model on the Aerody namic Performance and Flow Field Structure in High-press Ratio Centrifugal Compressor