Abstract:High-precision microelectromechanical system (MEMS) accelerometers have wide application in the military and civil fields. The closed-loop microaccelerometer interface circuit with switched capacitor topology has a high signal-to-noise ratio, wide bandwidth, good linearity, and easy implementation in complementary metal oxide semiconductor (CMOS) process. Aiming at the urgent need for high-precision MEMS accelerometers in geophones, we carried out relevant research on high-performance closed-loop application specific integrated circuit (ASIC) chips. According to the characteristics of the performance parameters and output signal of MEMS accelerometers used in geophones, a high-precision closed-loop interface ASIC chip based on electrostatic time-multiplexing feedback technology and proportion integration differentiation (PID) feedback control technology was designed and implemented. The interface circuit consisted of a low-noise charge-sensitive amplifier (CSA), a sampling and holding circuit, and a PID feedback circuit. We analyzed and optimized the noise characteristics of the interface circuit and used a capacitance compensation array method to eliminate misalignment of the sensitive element. The correlated double sampling (CDS) technology was used to eliminate low-frequency noise and offset of the interface circuit. The layout design and engineering batch chip were fabricated by a standard 0.35 μm CMOS process. The active area of the chip was 3.2 mm × 3 mm. We tested the performance of the accelerometer system with the following conditions: power dissipation of 7.7 mW with a 5 V power supply and noise density less than 0.5 μg/Hz1/2. The accelerometers had a sensitivity of 1.2 V/g and an input range of ±1.2 g. The nonlinearity was 0.15%, and the bias instability was about 50 μg.

Missile-borne Storage Measurement and Test Instrument of Acceleration Based on CPLD

Digital Capacitance Measurement System Based on FPGA

An Automatic Test System for a Spaceborne Chip of a Temperature-Sensing Controller

Development of radiation tolerance evaluation and measurement system for spaceborne D/A converter

Logical Architecture Design of Integrated Electronic System with High Real-Time and Reliability in ZDPS-2 Pico-Satellite

A New On-chip Signal Generator for Charge-Based Capacitance Measurement Circuit

Synchronous Data Acquisition System for Dynamic Machine Based on CPLD

The Integrated Micro Self-Adaptive Sampling Acceleration Measurement System

The Microinstrumentation For Acceleration

The Measurement of Flight Time for Pulsed Laser Ranging Based on CPLD

THE IMPLEMENT OF SPEED ESTIMATION CORE BASED ON MRAS ALGORITHM

High-speed Astigmatic Dual-Beam Interferometric Particle Imaging for Direct Depth Displacement and Velocity Measurement of Metal Droplet

A practical multi-channel pulse amplitude analyzer

CPLD-Based Displacement Measurement System for Nanoscale Grating Ruler

Application of CPLD in the No-contact Displacement Measurement System

The Simulation of Synchronizer Based on Missile

Development of Projectile Speed Measurement Based on STC Microcomputer

A Multi-channel Scaler with Adjustable Channel Width Used in Pulsed Neutron Logging Tools

A Low-Cost Measurement Methodology for LiDAR Receiver Integrated Circuits

Research on High-Resolution Miniaturized MEMS Accelerometer Interface ASIC

Structural Design of MEMS Acceleration Sensor Based on PZT Plate Capacitance Detection