Abstract:In recent years, failings of girders due to overturning in continuous girder bridges have repeatedly occurred in China. To investigate the overturning collapse mechanism and also to evaluate the rationality of anti-overturning design method using beam element models that are commonly adopted in practical design, detailed 3D finite solid element models of a typical single-column pier three-span continuous box girder bridge were built and a full-range numerical analysis of the models was conducted. The solid models included the prestressing effect and diaphragms. Both boundary and geometric nonlinearities were taken into consideration. Bearings were modeled considering the actual construction and dimensions of pot rubber bearings, the material characteristics and boundary conditions of rubber pads, and the contact properties between each part of the bearings. The analysis results revealed that the behavior of the bridge approached the nonlinear state at the onset of first bearing disengagement; the rotation (overturning) mechanism of the girder was gradually transitioned from deformable-body rotation to rigid-body rotation; all the end and middle bearings had been disengaged totally or locally at ultimate overturning failure. The analysis results also showed that bearing disengagements would lead to the ineffectiveness of the constraint in the transverse direction, which significantly reduced the overturning ultimate load and structural ductility before the final collapse. Prior to the first bearing disengagement, the vertical reactions calculated from the beam model were in good agreement with those from the solid model, while the transverse reactions were not. The behaviors were inaccurate after bearing disengagement in the beam models in which the movement of the rotation axis and transition of rotation mechanism failed to be realized. Reliable transverse stoppers and tensile anchors at bearing sections were recommended to efficiently improve anti-overturning stability and ductility in practical design.

Optimization Analysis of the Bifurcation Position on Irregular Bridge Structures Based on Examples

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Analysis of the influence of open-cut undercrossing of a national highway in Hangzhou on the existing municipal viaduct piers

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Analysis of Support Abutments of Curved Bridges with Single-pedestal Piers

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Analysis and assessment of articulated skew hollow slab beam bridge

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Bearing capacity analysis of a curvilinear box girder landscape bridge

Study on Northern Channel Bridge Structure Optimization of Hangzhou Bay Bridge

Dynamic Analysis and Design Parameter Optimization for Abnormal-Shaped Pedestrian Bridge with Steel Box Girder

Optimization Design of A Bridge Structure for Micro-nano Manufacturing Equipment

Structure Stress Analysis On Shenzhen Bay Flying Swallow Type Composite Arch Bridge

Stability analysis of the steel structure of tianjin bengbu bridge

Design on Dynamic Performance of Highway Bridges to Moving Vehicular Loads

Optimization Method for Solving the Reasonable Arch Axis of Long-Span CFST Arch Bridges

Finite Element Analysis in Dynamic Conditions of Bridge Crane Beam

Collapse Mechanism and Full-Range Analysis of Overturning Failure of Continuous Girder Bridges