Abstract:This present study mainly focuses on the influence of low-calcium circulating fluidized bed fly ash (LCFA) on the mechanical property and microstructure of cement-based materials under different curing conditions. The mechanical properties test was conducted by changing variable parameters, such as LCFA content, the internal mixing ratio of LCFA and fly ash (FA), and dry and water curing conditions. Further, the hydration products and pore structure were analyzed using XRD, FT-IR, TG-DTG, NI, SEM, and BET micro-testing technology. The strength development law of LCFA on cement-based materials is discussed. The research results show that LCFA has a certain degree of self-hardening and can be used as a cementitious material in cement-based materials. Still, the loose and porous microstructure of LCFA leads to higher water requirements, which reduces the fluidity of cement-based pastes. Water curing is favorable for promoting the development of LCFA on the long-term compressive strength of cement-based materials. When the LCFA was added to the cement, the optimal substitution ratio was 20%, and the compressive strength at 91 days reached 101 MPa. In the case of compounding LCFA and FA, when the internal mixing ratio of LCFA/FA was 3 and the total content was 20%, the mechanical properties were the highest, and the compressive strength at 91 days was 92 MPa. The microscopic analysis result shows that the cumulative hydration heat of the samples decreased significantly with the increase of dosage of LCFA. The main hydration products of cement-based materials mixed with LCFA were AFt, C-S-H gel, and Ca(OH)2. AFt and C-S-H gels are critical to the strength development of OPC-LCFA samples. The active Al2O3 and active SiO2 in LCFA were involved in hydration reactions to promote the formation of C-A-H and C-S-H gel and effectively promote the development of the mechanical properties. Overdosages of LCFA would reduce the ettringite formation rate. FA is not conducive to AFt formation in the hydration process of OPC-FA samples.

Effect of Fibers on Expansion of Concrete with a Large Amount of High F-Cao Fly Ash

Effect of Fiber on Mechanical Properties of Cement Stabilized Macadam Mixture

Expansion Properties of Concrete Containing Circulating Fluidised Bed Fly Ash for Use in Concrete-Filled Steel Tubes

Effects of calcium formate on early-age strength and microstructure of high-volume fly ash cement systems

Multiple effects of nano-SiO2 and hybrid fibers on properties of high toughness fiber reinforced cementitious composites with high-volume fly ash

Strength and Microstructural Characteristics of Activated Fly Ash–Cement Paste

Effect of Expansive Agent on the Mechanical Properties of Carbon-Fibre-reinforced Cement-Based Composites

Effects Mechanism of Fly Ash on MgO Expansive Cement——Discussion about the Effects of Fly Ash on the Structure and Mechanical Properties of Cement Stone with Expansion Sources

Effects of PVA fibers on microstructures and hydration products of cementitious composites with and without fly ash

The Effect of Fly Ash Content on Flexural Performance and Fiber Failure Mechanism of Lightweight Deflection-Hardening Cementitious Composites

Influence of fineness of MgO expansive agent on expansion, mechanical strength, and microstructure of fly ash-Portland cement paste

Expansion in low calcium fly ash-based geopolymer concrete: chemical factors influenced by silica fume and NaOH concentration

EXPANSIVE PROPERTY AND PORE STRUCTURE CHARACTERISITICS OF MAGNESIUM OXIDE SLIGHT EXPANSIVE CEMENT- FLY ASH BINDING MATERIAL

Investigating the Hydration, Mechanical Properties, and Pozzolanic Activity of Cement Paste Containing Co-Combustion Fly Ash

Mechanical Properties and Axial Compression Deformation Property of Steel Fiber Reinforced Self-Compacting Concrete Containing High Level Fly Ash

Influence of Fly Ash on the Deformation of Shrinkage-compensating Concrete with the Same Level of Strength

Investigation of Low-Calcium Circulating Fluidized Bed Fly Ash on the Mechanical Strength and Microstructure of Cement-Based Material

Effect of Cabon Fiber-Reinforced Polymer Layout on Mechanical Properties of Expansive Concrete Beams

Theoretical investigation on elastic property evolutions of low volume fly ash concrete

Strength, Permeability and Multiscale Pore Characteristics of Cement-Based Materials with High-Volume Fly Ash Contents and Different Water-Binder Ratios

High-flowable and High-Performance Steel Fiber Reinforced Concrete Adapted by Fly Ash and Silica Fume