Abstract:Neat polyimide films are known to be dense and rigid. They are therefore not suitable for use in membranes, sensors and sustainable energy storage applications. In this study, a novel technique has been used to simultaneously improve the porosity, rigidity, damping ability and impact resistance of polyimide membranes. It is demonstrated that dispersion of a small amount of polyaniline copolymer-modified clay of about 0.25-0.5 wt.% into the polyimide matrix resulted in an enhanced storage modulus while maintaining high damping ability and glass transition temperature, Tg. Novel polyimide/substituted polyaniline-copolymer-clay nanocomposite membranes containing poly(N-ethyl-aniline-co-aniline-2-sulfonic-acid)-modified-clay (SPNEAC) was successfully prepared and incorporated into the polyimide matrix to form modified clay/polyimide nanocomposites. UV-Vis analysis of the nanocomposite films shows that the optical transparency of the SPNEAC-PI nanocomposite membranes decreased with increasing SPNEAC concentration due to the high UV-Vis absorption of SPNEAC. Transmittance of about 3% was observed in the nanocomposite membrane containing 5 wt.% modified clay at 500 nm wavelength, which is significantly lower than that for the neat PI membrane of about 36%. The dispersion of SPNEAC containing a high concentration of clay (≥40 wt.% clay), in polyimide matrix, resulted in the attainment of a higher degree of imidization than was possible for the organoclay/polyimide nanocomposite. This behavior is believed to be due to the synergistic interaction between PI and SPNEAC. A correlation of the morphology and elastic modulus of the SPNEAC2/PI nanocomposites shows that at low loading of SPNEAC 2 ≤ 0.5 wt.%, the cross-sectional morphology of the composite is an open, spiky, weblike structure with a storage modulus of about 1 GPa, but it progressively evolves into densely packed microspheroids with storage moduli of ≥2 GPa at 10 wt.% SPNEAC2. The impact energy of SPNEAC/PI composites, calculated from the α-transition peak area, increased with increasing SPNEAC loading and were about 4 times that of neat PI at 10 wt.% SPNEAC.

Impurity-Free Modification and Nano-Dispersion of Carbon Black in Polyimide Films

Preparation and imidization of polyimide composites filled with boron nitride

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

Nanoporous Low‐κ Polyimide Films Via Poly(amic Acid)s with Grafted Poly(ethylene Glycol) Side Chains from a Reversible Addition–Fragmentation Chain‐Transfer‐Mediated Process

Effect of Surface Modifications of Carbon Black (CB) on the Properties of CB/polyurethane Foams

Polyhedral oligosilsesquioxane-modified boron nitride enhances the mechanical properties of polyimide nanocomposites

Comparison of Properties of Colorless and Transparent Polyimide Nanocomposites Containing Chemically Modified Nanofillers: Functionalized-Graphene and Organoclay

Preparation and properties of polyimide dielectric nanocomposites containing polyvinylpyrrolidone chemically functionalized barium titanate by in‐situ synthesis compounding

Synthesis and properties of the amino-functionalized multiple-walled carbon nanotubes/polyimide nanocomposites

Ecofriendly Preparation of Cellulose Nanocrystal-Coated Polyimide Fiber: Strategy for Improved Wettability

Morphology and physical properties of composites based on high-density polyethylene/propylene-ethylene random copolymers blends and carbon black

High Electrical and Mechanical Properties Obtained in A Polyimide Based Nanocomposite with Sandwich Structure via Multi‐Dimensional Design

Preparation and Properties of the Polyimide/multi-Walled Carbon Nanotubes (mwnts) Nanocomposites

Enhanced Dielectric Properties and Positive Temperature Coefficient Effect in the Binary Polymer Composites with Surface Modified Carbon Black

Fabrication of High Impact-Resistant Polyimide Nanocomposites with Outstanding Thermomechanical Properties

Fabrication and Dielectric Characterization of Advanced BaTiO3/Polyimide Nanocomposite Films with High Thermal Stability

Enhanced dielectric properties in polyimide nanocomposites containing barium titanate@ polydopamine core-shell nanoparticles

Effect of electrochemical anodic oxidation modification on the interfacial properties of carbon fiber reinforced polyimide composites

Chemically Modified Graphene/polyimide Composite Films Based on Utilization of Covalent Bonding and Oriented Distribution.

Preparation of self‐emulsifying waterborne polyamide‐imide sizing for carbon fiber and improvement on mechanical performances of carbon fiber reinforced thermoplastic polymer